View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	141
E-mail This Page To A Friend

           This is the Novak Havoc 3S Electronic Speed Control for
                       Brushed and Brushless Motors.

FEATURES: Functions on either two or three cell LiPo batteries in addition to
            4-9 NiMH cells
          Auto-detect brushed motor and battery type modes
          Compatible with all brushless motors having built-in thermal
            protection following ROAR guidelines
          Fully programmable, user-friendly interface with nine adjustable
            parameters:
            Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings
            from 0-27%)
          Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from
            1-5%) Throttle Curve (Linear and Expo), Brake Frequency* (7
            settings from 1-8 kHz), Reverse*, Motor Rotation* and LiPo Cut-Off
            * Available only in brushless mode
          Smart Braking II enables users to shift from forward to reverse
          Sensor-based for excellent braking and low-speed driveability
          Thermal Overload Protection circuitry allows ESC to operate only with
             the SS-Pro series or other brushless motors with built-in thermal
             protection that follow ROAR guidelines
          Water-resistant case with gasket seal
          120 day warranty

INCLUDES: Novak Havoc 3S Electronic Speed Control with heat sink, cooling fan,
            power trans cap module, instructions and double-sided tape

REQUIRES: Installing in vehicle and connecting to battery, motor and receiver

SPECS:    Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
          Size: 1.18 x 1.54" (30 x 39.1mm)
          Weight (without wires): 1.50oz (42.6g)
          Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor
          Motor Limit (brushed): 27-turn for 540-size motor/12-turn for 550-
            size motor
          On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp
          BEC: 6.0 volts DC / 1.5 amps
          Rated Current: 120 Amps @ 25°C trans. temp
          Braking Current: 120 Amps @ 25°C trans. temp
          Status LEDs: 4
          Voltage Cut-Off: 6.25V (when LiPo cut-off circuitry is enabled)
          Power Wires: 14G super-flex copper-strand silicone wire

COMMENTS: The following parts are available for this speed control
          NOVM5315  5315 Input Harness Plug 4.5"
          NOVM5320  5320 Input Harness Plug 9"
          NOVM5600  5600 Switch Harness
          NOVC5648  5648 Cooling Fan 30X30X6MM
          NOVM5679  5679 Power Trans-Cap Module (optional)
          NOVM5677  5682 Power Capacitor 680 (2)
          NOVC5730  5730 Connector 3.5mm (2 pair)

                                                                    jxs 4/21/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators