View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	141
E-mail This Page To A Friend

       This is the Novak 18.5T Mongoose Crawler Micro Brushless System.
        Micro sensor-based system specifically designed for 1/18-scale
                             crawler vehicles.

FEATURES:   Mongoose ESC- (NOVM1718)
          Four user-selectable throttle profiles (3 brushless, 1 brushed) with
            zero reverse delay
          Fully programmable interface using Novak's One-Touch button to
            adjust high-power Hill/Drag
          LiPo cut-off circuitry can be activated in all four throttle profiles
          Brakes, minimum drive and deadband
          Built-in motor rotation reversing (brushless modes only)
          Zero Reverse Delay available in all profiles for instant power
            delivery in both forward and reverse
          Water resistant case
            Three-80 Micro Pro 18.5 Turn Brushless Motor-
          380 size with sensor-based commutation
          High strength sintered rotor with 1/8" (3.2mm) diameter shaft
          Oversized Front Bearing for extra durability and extended life
          Aluminum ribbed end bells for additional cooling
          Direct-Solder Wiring Tabs for flexible soldering options
          Completely rebuildable
          120 day warranty on both components

INCLUDES: Mongoose ESC, Three-80 Micro Pro 18.5 Turn Brushless Motor, MOD 0.5
            15T pinion gear and instruction manual

REQUIRES: Installing in vehicle and connecting to battery (connector required
            depending on type installed on battery)

SPECS:      Mongoose ESC-
          Forward/Reverse: Forward, Hill/Drag Brake, Reverse
          Input Voltage: 2-3 Li-Poly cells or 4-9 NiMH/NiCd cells (1.2V/cell)
          On-Resistance*: 0.0038 ohms per phase (brushless/brush)
          Size: 1.15" x 0.95" (29 x 24.3 mm)
          Weight: 3.31 oz. (93.7 grams)
          Rated & Braking Current*: 40 amps per phase (brushless/brush)
           *Transistor's rating at 25 degrees C junction temperature
          Power Wires: 16-gauge
          BEC: 6.0 volt / 2.0 amps
          Motor Limit: 18.5-turn (brushless); 22-turn (brushed mode) 380-size
            or smaller motor
          Battery Plug: none
          Motor Plug: 2mm connectors
          Voltage Cut-Off: 6.25 volts (2S), 9.38 (3S) when Li-Poly cut-off
            circuitry is enabled

            Three-80 Micro Pro 18.5 Turn Brushless Motor
          Turns: 18.5
          Design: Sensor based
          Watts: 82
          Kv (unloaded): 4,400 RPM/volt
          Motor Size: 380, 1.02" D x 1.48" L (26 x 37.7mm)
          Shaft Diameter: 1/8" (3.2mm) accepts all existing pinion gears
          Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x
            3mm)

                                                                    jxs 3/10/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators