View Larger Picture

On-line Videos:	Video 1 (38.3 MB)
Instruction Manuals:	Manual 1 (2.6 MB)
Tower Catalog Page:	174
E-mail This Page To A Friend

        This is the Mode 2 Helicopter Version Futaba 10CG Transmitter
           and R6014HS 14-ch Receiver with the 2.4GHz FASST system.
                             No Servos Included

                           This version is Mode 2
               **For European Standard Mode 1 order FUTK9258**

             This heli version will default to helicopter settings,
      with mode 2 stick operation when powered up and has a non-ratcheted
                               throttle stick.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
            very quickly virtually eliminating signal conficts and
            interruptions unlike other 2.4GHz systems that only stay on one
            or two frequencies
          Dual antenna diversity enables FASST system to automatically and
            seamlessly select the best reception between the two antennas
            built into the receiver ensuring that the aircraft stays under
            constant control of transmitter regardless of altitude
          Graphics for programming swash plate types, swash ring and logic
            switches allowing timer activation or other function just by
            changing positions of specific sticks or functions
          6 programmable heli mixes
          Hover/pitch
          Hover throttle
          8 swash plate types with graphics
          Swash AFR
          5 point revo mixing
          Gyro menu
          7 point throttle and pitch curves with delay
          High/low pitch setting
          Throttle hold and three idle-ups with delay
          One year limited warranty

INCLUDES: Futaba 10C Transmitter
          NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
          NR-4RB 1000mAh NiCd Receiver Battery, FUTM1380
          FBC-19B RX, TX Wall Charger, FUTM1830
          R6014HS Receiver, FUTL7645
          Switch Harness
          8" (203mm) Servo Extension
          Neck Strap, FUTM5690

REQUIRES: Servos depending on type of aircraft

SPECS:    Transmitter;
            Power Supply: 9.6V NT8S700B NiCd battery
          Receiver;
            Receiving Frequency: 2.4GHz
            Power Requirement: 4.8 - 6V
            Current Drain: 70mA
            Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
            Weight: 0.72oz (20.8g)

COMMENTS: This radio is available in the following default modes;
            Air Mode 2,  FUTK9255
            Heli Mode 2, FUTK9256
            Air Mode 1,  FUTK9257
            Heli Mode 1, FUTK9258

                                                                    jxs 5/14/09
                                                           updated jpg 05/27/09
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators