View Larger Picture

Tower Catalog Page:	103
E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
                        HPI Cyber 10B Off-Road Buggy kit.

FEATURES: Chassis: Composite bathtub type chassis and upper deck
          Drive: Four wheel shaft with steel axles, dogbones and outdrives
            that are fully sealed for long life and smooth operation
          Shocks: Composite bodied oil filled
          Gearboxes: Closed
          Ball Bearings: Full set, 18 total
          Differentials: Front and rear ball type
          Transmission: Single-speed with steel dogbones
          Tires: HPI G-Rip, Front, 1.3" (34mm) wide, 3.4" (86mm) outer diameter
            Rear 1.7" (43mm) wide, 3.4" (86mm) outer diameter both, 2.2" (56mm)
            inner diameter
          Wheels: White plastic five spoke, Front 1.2" (30mm) wide, 2.2"
            (56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter
          Motor Mount: Three pieces of cast aluminum allow easy motor rotation
            for precise gear mesh alignment
          Spur Gear: 84 tooth, 48 pitch
          Bumpers: Nylon front
          Battery Tray: Located under drivetrain, accomodates stick, side by
            side and hard case LiPo batteries, batteries held in place with
            plastic strap and two height adjustable clips
          Body: Clear untrimmed buggy with wing and decals
          Suspension: Hot Bodies D4 type with stainless steel hinge pins
          Caster: Adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable, camber refers to the angle of the tops
            of the tires from vertical when viewed from front or behind vehicle
          Ackerman: Adjustable, Ackerman refers to the action of the inside
            front wheel turning faster than the outer front wheel during turns
          Steering: Bell-crank type with servo saver
          Warranty: Two year limited, valid only in the USA, Canada and South
            America

INCLUDES: HPI Cyber 10B Off-Road Buggy kit with tires, wheels, foam inserts,
            body, wing, 84 tooth 48 pitch spur gear, decal sheet and
            instruction sheet

REQUIRES: Radio: 2-channel with one servo (high-torque servo recommended for
            steering)
          Electric Motor: 540 type
          Electronic Speed Control: Compatible with motor
          AA Batteries: 8 for transmitter
          Battery: 7.2V 6-cell stick pack
          Battery Charger: Timed or peak for 6-cell battery
          Pinion Gear: 48 pitch
          Misc. Items: Track equipment

SPECS:      VEHICLE-
          Length:    11"   (280mm)
          Width:      9.8" (250mm)
          Height:     6.3" (160mm)
          Wheelbase: 11"   (280mm)

            BODY-
          Length:    12.6" (320mm)
          Width:      5.9" (150mm)
          Height:     2.8" (72mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location              Qty.  Bearing Set
             2   12x18x4mm  Center drive shaft     1     DTXC1597
             4   5x11x4mm   Front Wheel Hubs       2     DTXC1547
             4   5x11x4mm   Rear Wheel Hubs        2     DTXC1547
             2   12x18x4mm  Front Diff Gear        1     DTXC1597
             2   12x18x4mm  Rear Diff Gear         1     DTXC1597
             2   10x15x4mm  Front Diff             1     DTXC1595
             2   10x15x4mm  Front Diff             1     DTXC1595

                                                                    jxs 3/25/09
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators