View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

          This is the 1/10 scale radio controlled, electric powered
                     4WD Tamiya TRF511 Off-Road Buggy kit.

FEATURES: Chassis: 2.5mm thick carbon fiber with 2.5mm carbon fiber upper and
            lower decks (chassis is slotted for a 6-cell saddle pack battery),
            separate upper/lower center bulkhead for easier motor access and
            spur and pinion gear adjustments
          Drive: Four wheel, two belt with belt guide roller to reduce belt
            jumping and improve efficiency
          Bearings: Full set
          Differentials: Ball type front and rear
          Pinion Gear: 15 tooth
          Spur Gear: 91 tooth
          Suspension: Four wheel double wishbone, adjustable
          Shocks: Four oil-filled aeration type with aluminum threaded bodies
            (a 20cc bottle of #400 weight shock oil is included - TAMC3031)
          Bumper: Small front nylon construction
          Suspension: Fully adjustable 4-wheel independent double wishbone
          Steering: Bellcrank type with servo saver
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Tamiya TRF511 Off-Road Buggy kit with shock oil, decals and
            illustrated instruction manual

REQUIRES: Radio: 2-ch with one standard servo
          Speed Control: DTXM1055 or modeler's choice
          Battery: 6-Cell Saddle Pack - TRIC2019 and connector - DTXC2260
          Radio Batteries: 8-AA for transmitter - SANP3501
          Motor: TRIC3121 or modeler's choice and connector - TRIC5500
          Body: 1/10 scale buggy
          Wheels: 1/10 front and rear buggy wheels
          Tires:
          Battery Charger: DTXP4005 or modeler's choice
          Paint of modeler's choice
          Misc. Building and track equipment

SPECS:    Specs such as finished size and weight not provided

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size          Location            Qty.   Bearing Set
             2    5x9mm       Center Bulkhead        2     DTXC1531
             2    4x8mm       Spur Gear Assembly     1     DTXC1511
             4    10x15mm     Front/Rear Ball Diff   2     DTXC1595
             4    5x8mm       Front/Rear Ball Diff   2     DTXC1523
             2    3x7mm       Steering Drag Link     1     DTXC1506
             4    5x8mm       Steering Bellcrank     2     DTXC1523
             2    5x10mm      Rear Uprights          1     DTXC1535
             2    5x9mm       Front Uprights         1     DTXC1531

                                                                    jxs 5/04/09



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators