View Larger Picture

E-mail This Page To A Friend

     This is the Futaba MC950CR Programmable Electronic Speed Control for
            Brushless Electric Vehicle Motors 2.5 Turns and Above.
                      Not for use with AM radio systems.

FEATURES: The following settings and operations are possible with a Windows PC
            by using the optional CIU-2 Interface Unit (FUTM0951)
             Data Logging Function Data Read and Erase
             Variable Frequency Range Setting (500Hz - 30kHz)
             Dead Band
             Low Battery Protection Voltage
             Current Limiter
             Brake MAX Duty and Brake PWM Frequency
             Neutral Brake
             Reverse Cancel
          SMD MOSFETs with smallest internal resistance for minimal losses and
            maximum power
          Reverse cancellation function
          Linear forward, reverse and brake operations
          Low battery alarm
          Fan power connector (fan not included)
          One touch pushbutton input
          One year limited warranty through manufacturer

INCLUDES: Futaba MC950CR speed control, sensor wire, power capacitor, four
            sections 14AWG wire 10" (254mm) long, two sections heatshrink tube,
            four 1.4 x 2.5 and four 1.4 x 12.5mm screws, instruction sheet
            miniature screwdriver, double-sided tape and three zip ties

REQUIRES: Soldering motor and battery wires to posts on ESC

SPECS:    Power Requirement: NiCd, NiMH battery only, 4-7 cells (4.8 - 8.4V)
          PWM Frequency: Forward & Reverse, 500Hz-30kHz (Initial Value 3.0kHz-
                            5.0kHz
                         Brake, 500Hz-30kHz, Initial Value 1.0kHz
          BEC Voltage: 6.0V
          Current Capacity: (FET Rating) Forward, 900 A (Momentary load 1300A)
                                         Brake, 900A
          Size: 1.5 x 1.4 x 0.55" (37.2 x 36 x 14.0mm)
          Weight: 1.2oz (33.3g) not including connectors, cords or switch

                                                                    jxs 7/28/09
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators