View Larger Picture

E-mail This Page To A Friend

         This is the 121VR 0.21 Off-Road Competition Nitro Buggy Engine
                            from Team Associated.

FEATURES: 3+1 port chrome plated cylinder
          High silicon CNC machined piston
          Knife edged 7075 aluminum connecting rod
          Polished turbo scoop crankshaft with silicone insert
          Chrome plated back plate with turbo scoop
          Precision ball bearing supported crankshaft
          Lightweight machined aluminum heatsink head
          Oversized finned turbo head button
          Thermo insulated screw mounted 2-needle carburetor
          7.0mm, 8.0mm, and 9.0mm air restrictors

INCLUDES: One 121 .21VR Off-Road Competition Nitro Buggy Engine with slide
           valve carburetor, exhaust seal, 6mm and 7mm carb restrictors, and
           instruction manual

REQUIRES: Turbo glow plug, air filter and filter oil, glow ignitor, 30% nitro
            fuel
          Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life. In the
            past, the conventional lubricant content used in fuel was 18%. But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower. These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:    Displacement: .21 cu in (3.46cc)
          Bore: 16.6mm (0.65")
          Stroke: 16.0mm (0.63")
          Maximum RPM: 40,000
          Weight: 352g (12.4oz)
          Distance Between Mounting Holes Same Side: 21mm (0.83")
          Distance Between Mounting Holes Opposite Side: 38mm (1.5")
          Height Bottom of Mounting Tabs/Top of Cylinder Head: 94mm (3.7")
          Width of Mounting Tabs: 8mm (0.31")
          Distance from Backplate to Front Bearing: 64mm (2.5")
          Distance from Center of Engine to Front Bearing: 42mm (1.7")
          Distance from Center of Engine to Backplate: 22mm (0.87")

                                                                    cnh 6/22/09
                                                                         ir/jxs



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators