This is the 13x18" LiPoSack Battery Sack+ from Woodworks LLC.
FEATURES: Constructed of woven fiberglass, this sack is used by R/C pilots and
racers to contain any possible explosions from batteries
involved in a crash or during charging or discharging
Can be used for up to 6S 5000mAh batteries
Large size allows a 1/10 scale carpet or on-road R/C car to be placed
inside during charging if modeler does not wish to remove the
battery
Also serves as a carrying case for laptop computers during
transportation and air travel
INCLUDES: 13x18" LiPoSack+ Battery Sack+ with instruction sheet
REQUIRES: Placing battery to be charged toward bottom of bag, routing charge
leads through vent at top seam and pressing hook and loop material
fully closed
SPECS: Size: 13 x 18" (330 x 457mm)
Weight: 4oz (113g)
COMMENTS: Charge batteries in a safe area away from flammable materials and
only on a non-flammable surface in a vented area. Do not discharge
batteries below 3V per cell. Doing so may result in cell damage and
subsequent cell venting on future charging
Do not recharge damaged batteries. Dispose of damaged batteries in
the proper manner.
It is modeler's sole responsibility to assure their charger is
working correctly. Always monitor charging process. Failure to do
so may result in cell damage or fire.
In the event of a crash, remove battery from model for observation
and place in a safe open area away from flammable materials.
jxs 2/02/09
ir/jxs
– If you need more information, use these Woodworks resources – |
Web Site: http://www.liposack.com/
Phone: 858-761-2578
|
|
Postal Address:
Woodworks
AKA LIPOSACKS
7905 PORT ROYALE DR
SAN DIEGO, CA 92126
|
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
