View Larger Picture

Tower Catalog Page:	114
E-mail This Page To A Friend

           This is the electric powered, radio controlled 1/8 scale
                        RC8e Buggy Kit from Associated.

FEATURES: Chassis: Hard anodized 7075 T-6 aluminum, 0.12" (3mm) thick
          Drive: Four wheel shaft with 3.5mm light CVA drivetrain and blue
            aluminum drive hexes, rear molded CVA boots keeps dirt out of rear
            joints
          Shocks: Oil filled Big Bore with 4mm diameter gold shafts and
            composite bodies, 25W silicone shock oil
          Shock Towers: 0.12" (3mm) thick aluminum
          Battery Tray: Molded plastic, supports two ROAR-approved 1/10 scale
            7.4v LiPo battery packs with room for foam pads, three hook and
            loop battery straps
          Motor Mount: Rigid one-piece
          Body: Clear lexan with cooling scoops
            predrilled wing with adjustable angle and location
          Wheels: White plastic Factory Team, 3.27" (83mm) diameter, 1.83"
            (46.5mm) wide, blue aluminum nylock wheel nuts
          Suspension: Adjustable pivot bushings for different pivot height
            options, 3/8" (10mm) thick suspension arms
          Caster: Adjustable, blocks adjust 14, 16 or 18° with molded inserts,
            caster/toe-in refers to the angle of the front suspension when
            viewed from the side of the car in relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Dual bellcrank
          Pinion Gear: 15 tooth
          Spur Gear: 46 tooth composite

INCLUDES: Associated RC8e Buggy Kit with wheels, pinion and spur gear, clear
            body, shocks, wing, decals and instruction manual

REQUIRES: Radio: 2-channel with heavy duty steering servo
          ESC: 1/8 scale Specific
          Motor: 1/8 scale Specific
          Tires: 1/8 scale buggy with foam inserts
          Battery: 1 or 2 6-cell NiMH packs (7.4V) OR
            1 or 2 2-cell LiPo packs (7.4, 11.1, or 14.4V)
          Charger: Depending on battery type
          Building and track equipment

SPECS:      Vehicle-
          Length: 18.5" (470mm)
          Width:  12"  (305mm)
          Weight: 7.7 lbs (3492g), actual weight will vary depending on
            electronics
          Wheelbase: 12.7" (323mm)
          Track: 10.2" (259mm) distance between outer edges of tires
          Internal Gear Ratio: 4.30:1
            Body-
          Length: 12.8" (325mm)
          Width:   7.9" (200mm)
          Height:  3.9" (100mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             6   8x16x5mm   Diffs/ Front & Rear Ends    3     ASCC9716
             2   5x10x4mm   Clutchbell                  1     ASCC9717
             2   6x10mm     Bellcrank                   1     ASCC2604
             2   15x21x4mm  Rear End                    1     ASCC6862
             4   10x6x3mm   Steering                    1     ASCC6861
             4   8x5x3mm    Steering                    1     ASCC6861

                                                                    jxs 3/26/09



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators