This is the radio controlled, electric powered, receiver ready
Multiplex EasyCub Trainer Airplane.
For Beginner Modeler/Fliers.
FEATURES: Construction: Elapor foam white in color
Wings: Two-piece all foam
Radio Compartment: Accessible under wing
: Two Multiplex Tini-S
Brushless Motor: Himax C 2816-1220
ESC: MULTIcont BL-27/II
Propeller:
Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter,
tailgear, prebent 0.039" (1mm) diameter wire
Wheels: Main, two foam 2" (51mm), foam 1" (25.4mm) tailwheel
Canopy: Elapor foam
Decals: Peel and stick application with yellow and blue accents and
black window detail
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, and tail assemblies, pushrods, two ,
motor, ESC, propeller, all hardware, pre-bent 0.039" (1mm) wire
landing gear, two 2" (51mm) main wheels, 1" (25.4mm) tailwheel,
plastic motor mount, two fiberglass wing spars, decal sheet and
photo-illustrated instructions
REQUIRES: Radio: 3 channel
Misc. Items: Building and field equipment
SPECS: Wingspan: 55" (1397mm)
Wing Area: 565 sq in (36.5 sq dm)
Weight: 850.49g (30oz)
: 7.53 oz/sq ft) (23 g/sq dm)
Length: 38" (965mm)
Airfoil: Flat bottom high-wing placement
: 3.1" (80mm) Back from the wing's
at the
Control Throws-
: Up 0.59" (15mm), Down 0.47" (12mm)
: Right to Left 0.59" (15mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium glue used with
an activator is the only method of gluing recommended by the
manufacturer.
jxs 10/12/09
– If you need more information, use these Multiplex resources – |
Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948
|
|
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064
|
Click here for Units of Measure Conversion Calculators
|