This is the radio controlled, glider or electric powered, almost-ready-to-fly,
Multiplex Xeno Airplane.
For Intermediate Modeler/Fliers 14 Years of Age and Older.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Construction: Elapor foam white in color, can be folded in two
Wings: with replaceable fins
Radio Compartment:
(Delta Mixer) Control: Single servo
Decals: Peel and stick application with gray and orange accents
Building Time: Ready to fly in two to three hours
INCLUDES: Pre-molded wings, and tail assemblies, pushrods, all
hardware,
decal sheet and photo-
illustrated instructions
REQUIRES: Electric Motor and ESC: If building as an electric powered model,
Multiplex makes a Power Pack (MPUG3255) for the Xeno that
includes a brushless motor, speed control, two props, canopy,
fairing and motor shaft extension with collet
Battery:
Radio: 4 channel
Servos: Four mini size, 2-, 1-, 1-
Receiver Battery: 4.8V
Misc. Items: Building and field equipment
SPECS: Wingspan: 49" (1245mm)
Wing Area: 496 sq in (32 sq dm)
Weight: 14oz (395g) built as glider
16.2oz (460g) built as electric-both weights approximate
: 4.1/4.7 oz/sq ft (12.5/14.5 g/sq dm)
Airfoil:
:
Control Throws-
: Up
: Right to Left
: Up
Down
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium glue used with
an activator is the only method of gluing recommended by the
manufacturer.
jxs 4/27/09
ir/jxs
– If you need more information, use these Multiplex resources – |
Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948
|
|
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064
|
Click here for Units of Measure Conversion Calculators