Parts Express Eligible:	Yes
E-mail This Page To A Friend

  This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck.
              These hold downs screw directly into the chassis.

FEATURES: Black nylon construction
          Adhesive backed foam strips
          Posts to accomodate either flat packs or side-by-side packs.

INCLUDES: Two battery pack hold downs
          Two 140mm adhesive foam strips
          Four 12x45mm adhesive foam strips
          Six  10x45mm adhesive foam strips
          Four 3mm hold down posts
          Two 3mm shoulder screws
          Four clips

REQUIRES: Assembly onto chassis

SPECS:    Length of Battery Hold Downs: 158mm
          Length of Hold Down Posts: 22mm
          Length of Shoulder Screws: 20.5mm

COMMENTS: If flat packs are being used, the two shoulder screws can be used
            (one on each hold down) with the battery hold downs inverted so
            that the hold down can simply be swung out of the way to remove the
            pack after the other end has been unclipped.  If side-by-side packs
            used, then all four posts with clip holes need to be installed
            so that the hold downs can be completely removed in order to take
            take out the packs.
                                                                    cmc 1/21/01
                                                                          ir/jl



– If you need more information, use these Traxxas resources –

E-mail: support@traxxas.com
Web Site: http://www.traxxas.com/
Phone: 888-872-9927


 
Postal Address:
Traxxas
1100 KLEIN RD
PLANO, TX 75074  








Click here for Units of Measure Conversion Calculators