View Larger Picture

Tower Catalog Page:	141
E-mail This Page To A Friend

    This is the Novak Rooster Crawler Reversible Electronic Speed Control
            and the # Forty Five Turn Crawler Brushed Motor.

FEATURES:   ESC Features-
          Two specific crawling driver profiles that feature zero reverse delay
            and high-powered drag brakes (or "hill or "hold" brakes)
          Built-in LiPo cut-off protection prevents batteries from going below
            the critical safety voltage level
          User replaceable input harness
          Heavy duty 6V/5A BEC
          Radio priority and polar drive circuitry
          High-efficiency heat sink
          Power output for optional 6V fan (available separately, NOVC5648)
          Water resistant case
          Thermal overload protection
            Crawler Motor Features-
          Designed for vehicles requiring precise movement control
          High number of turns for excellent torque and long-run times
          Dual-ball bearing for smoothness and efficiency
          100 percent rebuildable with user-replaceable brushes and springs
          Direct-Solder Wiring Tabs for flexible soldering options
          Three factory-installed motor capacitors to reduce glitching

INCLUDES: Novak Rooster Crawler Electronic Speed Control with instructions
            Tamiya style JST battery connector, use-replaceable input harness
            and double-sided tape
          Novak Forty Five Crawler Brushed Motor

REQUIRES: Installing in vehicle and connecting motor and battery

SPECS:      ESC
          Input Voltage: 4-7 NiCd/NiMH cells (1.2V per cell) or 2 LiPo cells
          Size: 1.54" x 1.18" (39 x 30mm)
          Weight: 2.66oz (75.5g) w/wires; 1.57oz (44.5g) w/o wires
          On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
          Rated Current: 400A* (forward)
          Braking Current: 200A*
          BEC: 6.0V/5.0A
          Motor Limit 27-turn Brushed (at 6 cells NiMH)
          Discrete Steps: 256 Forward; 256 Reverse
          Battery Plug: Tamiya type
          Drive Profiles: 2
          Status LEDs: 2
          Voltage Cut-off: 6.25V (LiPo Profiles)
          *MOSFET rating at 25°C junction temperature

            Forty Five Crawler Brushed Motor
          Number of Turns: 45
          Design: Stand-up Brushed
          Input Voltage: 4-7 cells (1.2V/cell) or 2S Li-Poly cells
          Motor Size:  2.07 x 1.42" (52.7 x 36.1mm)
          Shaft Diameter:  0.125" (3.2 mm) [accepts all existing pinion gears]
          Bearing: Standard 3/8" x 1/8"
          Weight: 5.97 oz. (169g)
          Magnet:  High-Strengh Ferrite

COMMENTS: Rooster Crawler ESC available separately, NOVM1841
          45T Crawler Motor available separately, NOVC3545

                                                                   jxs 04/30/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators