View Larger Picture

E-mail This Page To A Friend

        This is a Radio Controlled, Electric Powered, Receiver Ready
                   Foam Construction, Multiplex FunJet.
               This model features a rear mounted motor design.

FEATURES: Construction, Elapor foam, white in color
          Wings: Elapor foam construction, white in color
          Radio compartment: Elapor foam construction, white in color
          Servos: Two nano size
          Motor: Himax 2825-2700 motor, factory-fitted and wired
          Electronic Speed Control: MULTIcont BL-37
          Canopy: Elapor foam construction, white in color
          Landing gear: None, model should be hand launched and belly landed
          Hardware: Pushrods, hook and loop material, screw lock connectors,
           and other miscellaneous hardware inlcuded
          Motor Mount: Black plastic construction with adjustable motor thrust
           lines
          Elevon control
          Fiberglass wing spar: 22.5" (571mm) long by .25" (6.35mm) diameter

INCLUDES: Foam fuselage; wing panels; turtle deck; canopy; and fins, two wire
           pushrods (1mm (.039") diameter), fiberglass wing spar, plastic servo
           fairings, motor mount, hardware kit, decals, illustrated assembly
           instructions, two servos, propeller, motor and ESC

REQUIRES: Battery - 3 cell 2100-3200mah LiPo pack (may require a
           mating connector for the speed control - WSDM1302)
          Charger: LiPo compatible
          Radio: Minimum 3 channel with elevon mixing

SPECS:    Wingspan: 31.29" (795mm)
          Wing Area: 232 sq in (15 sq dm)
          Weight: 21oz (620g)
          Length: 29.52" (750mm)
          Propeller: APC 5.5 x 4.5"
          Airfoil: Semi-symmetrical, mid wing
            at the fuselage sides.
            Elevons: Up: .47" (12mm)     Down: .39" (10mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                 jxs 10/13/2009
                                                                   cnh 11/10/09



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators