View Larger Picture

Tower Catalog Page:	105
E-mail This Page To A Friend

            This is the 1/8 scale glow powered, radio controlled,
            Tamiya competition level TRF801X Off-Road Buggy Kit.

FEATURES: Chassis: A7075 hard anodized Duralumin 0.12" (3mm) thick, plastic
            chassis side guards, carbon fiber servo plate and upper decks
          Drive: Four wheel universal shaft drive
          Fuel Tank: 4.2oz (125cc)
          Engine Mount: Angled 15° for better lateral weight distribution
          Clutch: Three shoe aluminum with 14 tooth steel clutch bell
          Transmission: Single speed
          Ball Bearings: Full set included
          Shocks: 15mm large volume, aluminum bodied
          Shock Towers: Machined aluminum 0.20" (5mm) thick
          Radio Box: Sealed, two receiver battery locations to adjust weight
            distribution
          Gearboxes: Sealed front and rear
          Differentials: Sealed bevel gear
          Brakes: Dual 1.2" (32mm) diameter shoes with turnbuckle linkage
            system
          Body: Low profile clear polycarbonate with high down force wing
            molded in white
          Suspension: Locknut captured suspension hinge pins, front and rear
            stabilizers
          Caster: Adjustable front and rear, caster/toe-in refers to the angle
            of the front suspension when viewed from the side of the car in
            relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Machined aluminum steering knuckles with servo saver

INCLUDES: Tamiya TRF801X Off-Road Buggy Kit, clear body, wing, shocks, fuel
            tank, air filter, decals and instruction manual

REQUIRES: Radio: 2-Channel with 1 high-torque servo for steering & standard
            servo for throttle
          Radio Batteries: Eight AA size
          Receiver Battery: 6.0V
          Engine: .21 - .28cu in (3.4 - 4.6cc)
          Exhaust: Manifold and tuned pipe
          Glow Starter: 1.2 volt
          Starter Box: 1/8 scale
          Tires: 1/8 scale buggy type
          Wheels: 1/8 scale dish type with 17mm hex
          Paint: Polycarbonate safe spray or brush-on
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life.  In the
            past, the conventional lubricant content used in fuel was 18%.  But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower.  These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length:     19.5" (495mm)
          Width:      11.8" (300mm)
          Wheel Hubs: 17mm hex
          Wheelbase: 12.8 - 13.1" (326-332mm) wheels on-center front-to-rear
          Specs such as tread, track and ground clearance not provided by
            manufacturer
          Gear Ratio: 11.34:1

            Body-
          Length:     14.6" (372mm)
          Width:       7.6" (194mm)
          Height:      3.7" (94mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty       Bearing Set
             4   8x16mm   Front Hubs                  2        DTXC1585
             4   8x16mm   Rear Hubs                   2        DTXC1585
             4   8x16mm   Center Diff                 2        DTXC1585
             4   8x16mm   Rear Diff                   2        DTXC1585
             4  10x6mm    Steering Linkage            2        DTXC1561
             2   5x10mm   Clutch Bell                 1        DTXC1535

                                                                    jxs 4/07/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators