View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

         This is the electric powered, radio controlled, 1/10 scale
              Tamiya Calsonic Impul GT-R 2008 On-Road Car Kit.

FEATURES: Chassis: TB-03 bathtub type with motor cooling duct
          Drive: Four wheel shaft
          Motor: 540 size
          Motor Mount: One-piece aluminum allows easy changing and adjusting of
            gears
          Ball Differentials: Front and rear
          Wheels: Black six spoke plastic, +2 offset, 0.94" (24mm)
            wide, 1.9" (48mm) diameter
          Tires: Racing slick, width 0.94" (24mm), diameter, 2.5" (64mm) with
            foam inserts
          Shocks: C.V.A. super mini oil filled, plastic body
          Suspension: Inboard front suspension with horizontally mounted shocks
            for low front profile, reversible short suspension and TRF416-spec
            front and rear uprights
          Body: Clear polycarbonate with wing, also compatible with TA05-IFS
            chassis
          Bumper: Front urethane
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type with servo saver with adjustable tie rod

INCLUDES: Tamiya Calsonic Impul GTR On-Road Car Kit with body, wheels, decals,
            instruction manual, 22 tooth pinion, 64 tooth spur gear, white
            plastic rear wing

REQUIRES: Radio: 2-channel with one servo
          Receiver: 2-channel
          ESC: TEU-302BK (TAMM3178)
          Radio Batteries: Eight AA
          Battery: 6-cell stick type with Tamiya type connector
          Battery Charger: Timed or peak for 6-cell battery
          Building and field equipment

            Vehicle-
SPECS:    Length:    14.3" (363mm)
          Width:      7.4" (188mm)
          Height:     4.1" (104mm)
          Weight:     2.4lbs (1077g)
          Wheelbase: 10.1" (257mm)
          Tread:      6.5" (165mm) center of front wheels side to side
          Gear Ratio: 1:7.09
            Body-
          Length: 445mm (17.5")
          Width: 200mm (7.9")
          Height: 105mm (4")

          For replacement bearings or to upgrade to bearings use:
            Qty.  Size      Location              Qty.     Bearing Set
             4   5x8mm    Fr/R Diffs               2         DTXC1523
             4  10x15mm   Fr/R Diffs               2         DTXC1595
             2   5x10mm   Spur Gear                1         DTXC1535
             1   6x10mm   Spur Gear                1         DTXC1561
             1   6x10mm   Front Gearbox            1         DTXC1561
             1   5x10mm   Front Gearbox            1         DTXC1535
             1   6x10mm   Rear Gearbox             1         DTXC1561
             1   5x10mm   Rear Gearbox             1         DTXC1535
             4   5x8mm    Steering Linkage         2         DTXC1523
             2   5x10mm   Front Axles              1         DTXC1535
             2   5x10mm   Rear Axles               1         DTXC1535

                                                                    jxs 6/10/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators