This is the radio controlled, electric powered, 1/10 scale
Tamiya Fiat 500 M-03M On-Road Car Kit.
FEATURES: Chassis: M-03 monocoque style
Drive: Front wheel
Motor: 540 type installed in front area of chassis
Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194
Differential: Planetary type
Shocks: Friction (not oil-filled)
Gearbox: Enclosed
Body: Vacuum formed clear polycarbonate, untrimmed
Pinion Gear: 20 tooth
Caster: Adjustable, caster/toe-in refers to the angle of the front
wheels when viewed from the side of the car in relation to the
chassis
Camber: Fixed, non adjustable
Suspension: Four wheel independent double wishbone
Wheels: Plastic with brushed chrome finish 1.5" (37.9mm) diameter,
0.98" (24.8mm) wide
Tires: Treaded rubber 2.7" (68.5mm) diameter, 0.96" (24.5mm) wide
with inner sponges
Steering: Bell crank with servo saver
INCLUDES: Tamiya Fiat 500 M-03M On-Road Car Kit, clear body, decal sheet, ESC
motor and instruction manual
REQUIRES: Radio: 2-channel with one servo and electronic speed control
8 AA Batteries: Eight for transmitter
Battery: 6-cell stick pack with Tamiya type connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: Spray or brush-on polycarbonate safe
Building and track equipment
SPECS: Length: 13.7" (347mm)
Width: 6.7" (170mm)
Height: 5.5" (140mm)
Wheelbase: 8.8" (225mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x11mm Spur Gear 1 DTXC1547
1 5x8mm Spur Gear 1 DTXC1523
1 5x11mm Counter Gear 1 DTXC1547
1 5x8mm Counter Gear 1 DTXC1523
1 5x11mm Diff Gear 1 DTXC1547
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535
jxs 04/14/09
ir/jxs
Click here for Units of Measure Conversion Calculators
|