This is the 5Hz GPS Expander Module for the
Eagle Tree Data Recorder and V3 eLogger Products.
FEATURES: For use in either RC vehicles or aircraft this module allows
modelers to log vehicle position, visualize model on a 3D graph
against a photo image of field or track and see position of model
on the Seagull Dashboard screen
Google Earth software allows data to be easily and fully visualized
3D position graphing in the Virtual Dashboard software with support
for overlayed images of field or track
Latitude/longitude, GPS speed, GPS altitude, course, distance to
operator and UTC timestamp
One year limited warranty
INCLUDES: 5Hz GPS Expander Module with 4-pin connector and instruction sheet
REQUIRES: Plugging into Data recorder and installing in model
SPECS: Update Rate: 5Hz Length: 1.7" (43mm)
WAAS and EGNOS support Width: 1.4" (36mm)
Time to Fix: 1 sec hot, 41 sec cold (typ) Thickness: 0.5" (13mm)
Speed Accuracy: Approx. 0.1 knot Weight: 0.8oz (23g)
Position Accuracy: 11' (3.3m) Current Consumption: Approx 33mA
Antenna: Built-in patch w/port for optional external antenna
Sensitivity: Approx. 158dBm
Datum: WGS84
COMMENTS: This expander is compatible with Eagle Tree Systems Flight Data
Recorder V2, Car and Boat Data recorders with firmware version
4.15 or higher. It is also compatible with Seagull Dashboards
with firmware version 4.15 or higher and eLogger V3.
For firmware lower than these versions e-mail
support@eagletreesystem for upgrade info.
jxs 4/16/08
ir/jxs
Click here for Units of Measure Conversion Calculators