This is the RB Concept Junior 9 3.48cc Buggy Engine.
FEATURES: Three intake port cylinder liner
Composite body slide valve with 8mm venturi
13mm main bearing and double rubber sealed front ball bearing
Light off road L2G cooling head
INCLUDES: RB Concept Junior 9 3.48cc Buggy Engine, , , decal
sheet, parts list and instruction manual
REQUIRES: Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold
wrench and track equipment
SPECS: Displacement: 0.21cu in (3.48cc)
Bore: 16.42mm
Stroke: 16.42mm
Intake Ports: 3
Exhaust Ports: 1
Crankshaft: 13mm
Intake Diameter: 8mm
Settings: Main Needle, 3.5 turns from closed
Idle Needle, 5 turns from closed
Weight: 12.3oz (350g)
Distance from Backplate to end of Crankshaft: 3.7" (94mm)
Height from Mounting Tab to top of Cylinder Head: 4" (102mm)
Center of Mounting Holes Same Side: 0.83" (21mm)
Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
Width at Mounting Tabs: 1.8" (45mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.61" (15.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
Diameter of Cooling Head: 2.4" (60mm)
jxs 4/28/09
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators