This is the RB Concept S9 3.48cc Buggy Racing Engine.
FEATURES: Seven intake port cylinder liner
Composite body slide valve with 8mm venturi
13mm square stroke crankshaft
13mm main bearing and double rubber sealed front ball bearing
Light off road L2G cooling head
INCLUDES: RB Concept S9 9 3.48cc Buggy Engine, , , decal
sheet, parts list and instruction manual
REQUIRES: Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold
wrench and track equipment
SPECS: Displacement: 0.21cu in (3.48cc)
Bore: 16.42mm
Stroke: 16.42mm
Intake Ports: 7
Exhaust Ports: 1
Crankshaft: 13mm
Intake Diameter: 8mm
Settings: Main Needle, 3.5 turns from closed
Idle Needle, 5 turns from closed
Weight: 12.2oz (347g)
Distance from Backplate to end of Crankshaft: 3.7" (94mm)
Height from Mounting Tab to top of Cylinder Head: 4" (102mm)
Center of Mounting Holes Same Side: 0.83" (21mm)
Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
Width at Mounting Tabs: 1.8" (45mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.61" (15.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
Diameter of Cooling Head: 2.4" (60mm)
jxs 4/28/09
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators