E-mail This Page To A Friend

    This is the RB Concept Buggy 9 .21 cu in (3.48cc) Racing Buggy Engine
                 with the In-Line 2045P/192P Tuned Pipe Kit.
                Designed for high competition off-road races.

FEATURES: Light off-road L2G cooling head (17g lighter)
          Double rubber sealed front crankshaft bearing
          5 ports + 2 bypass + 3 Multi Exhaust System (MES)
          Nylon body slide valve 9mm carburetor with 6, 7 & 8mm venturi
            included
          Bi-turbo 14mm long stroke crankshaft
          Polished aluminum inline pipe construction

INCLUDES: RB Concept B9 Racing Buggy Engine with turbo glow plug, slide
            valve carburetor, exhaust gasket, decal sheet, instructions, EFRA-
            2045 tuned pipe, header and mounting spring

REQUIRES: Fuel: Car blend with 10%-25% nitro content
          Glow plug wrench and track equipment

SPECS:    Displacement: 0.21cu in (3.48cc)
          Bore: 16.22mm
          Stroke: 16.80mm
          Intake Ports: 5+2 bypass
          Exhaust Ports: 3
          Crankshaft: 14mm
          Carburetor Intake Diameter: 9mm
          Carburetor Settings: Main Needle, 3.5 turns from closed
                               Idle Needle, 5 turns from closed
          Weight: 12.5oz (354g)

          Distance from Backplate to end of Crankshaft: 3.7" (94mm)
          Height from Crankcase Bottom to top of Cylinder Head: 4" (102mm)
          Height from Mounting Tab to top of Cylinder Head: 3.7" (86mm)
          Center of Mounting Holes Same Side: 0.83"  (21mm)
          Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
          Mounting Hole Diameter: 0.12" (3.2mm)
          Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
          Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
          Width at Mounting Tabs: 1.8" (45mm)
          Distance/Bottom of Crankcase to Crankshaft Center: 0.61" (15.5mm)
          Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
          Diameter of Cooling Head: 2.4" (60mm)
          Pipe Length: 6.88" (175mm)
          Pipe Diameter: 1.49" ( 38mm) at widest point

COMMENTS: Engine available separately, RBDG0325.

                                                                   jxs 10/15/09
                                                                         ir/jxs



– If you need more information, use these RB Products resources –

E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707


 
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034  








Click here for Units of Measure Conversion Calculators