This is the RB Concept WS9 3.48cc Off-Road Racing Engine.
FEATURES: Seven intake port cylinder liner, three exhaust ports-Multiple
Exhaust System (MES)
Polished aluminum three chamber in-line tuned pipe with header
Turbo type combustion chamber with turbo
Composite body 9mm slide valve with 6, 7 and 8mm venturis
included
13mm bi-turbo square stroke crankshaft
13mm main bearing and double rubber sealed front ball bearing
Light off road L2G cooling head
INCLUDES: RB Concept WS9 3.48cc Off-Road Engine, turbo , ,
exhaust gaskets, tuned pipe, decal sheet, parts list and
instruction manual
REQUIRES: Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold
wrench and track equipment
SPECS: Displacement: 0.21cu in (3.48cc)
Bore: 16.42mm
Stroke: 16.42mm
Intake Ports: 7
Exhaust Ports: 3
Crankshaft: 13mm bi-turbo with RB Concept Coating
Intake Diameter: 9mm
Settings: Main Needle, 3.5 turns from closed
Idle Needle, 5 turns from closed
Weight: 12.2oz (348g)
Distance from Backplate to end of Crankshaft: 3.7" (94mm)
Height from Mounting Tab to top of Cylinder Head: 4" (102mm)
Center of Mounting Holes Same Side: 0.83" (21mm)
Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
Width at Mounting Tabs: 1.8" (45mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.61" (15.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
Diameter of Cooling Head: 2.4" (60mm)
jxs 6/01/09
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators
|