This is the RB Concept Touring 9 Circuit Car Racing Engine.
For high performance racing.
FEATURES: Bi-turbo 11.5mm ground camshaft
EFRA/ homologated 3 ports
Slide valve aluminum body with 6.5mm venturi
Turbo combustion chamber, O-ring sealed to avoid vibration and dirt
entry
Touring L2G anodized aluminum turbo cooling head
INCLUDES: RB Concept Touring 9 Car Engine, turbo , , decal
sheet, exhaust gasket and instructions
REQUIRES: Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold
wrench and track equipment
SPECS: Displacement: 0.128cu in (2.11cc)
Bore: 13.70mm
Stroke: 14.25mm
Intake Ports: 3
Exhaust Ports: 1
Crankshaft: 11.5mm bi-turbo
Intake Diameter: 6.5mm
Settings: Main Needle, 5 turns from closed
Idle Needle, 2.5 turns from closed
Weight: 7.5oz (213g)
Distance from Backplate to end of Crankshaft: 3.1" (80mm)
Height from Mounting Tab to top of Cylinder Head: 3.3" (83mm)
Center of Mounting Holes Same Side: 0.43" (11mm)
Center of Mounting Holes Opposite Side: 1.2" (31.5mm)
Mounting Hole Diameter: 0.13" (3.3mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (30mm)
Width of Crankcase Below Mounting Tabs: 1" (25.5mm)
Width at Mounting Tabs: 1.5" (39mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.49" (12.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 0.90" (23mm)
Diameter of Cooling Head: 1.96" (50mm)
jxs 4/28/09
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators