This is the RB Concept Touring Junior 9 Touring Car Engine
with Header and 2604 Tuned Pipe.
For sport running and occasional racing.
FEATURES: EFRA/ homologated 3 ports
Turbo combustion chamber with turbo
Slide valve aluminum body with 5.4mm venturi
11.5mm main bearing
Dust protection caps for , exhaust, fuel intake and
crankshaft
Polished aluminum EFRA 2604 in-line tuned pipe with aluminum header
INCLUDES: RB Concept Touring Junior 9 Engine, turbo , ,
decal sheet, two exhaust gaskets, instructions, tuned pipe and
header
REQUIRES: Fuel: Car blend with 10%-25% nitro content
wrench and track equipment
SPECS: Displacement: 0.128cu in (2.11cc)
Bore: 13.8mm
Stroke: 14.00mm
Intake Ports: 3
Exhaust Ports: 1
Crankshaft: 11.5mm Serpent
Intake Diameter: 5.4mm
Settings: Main Needle, 5 turns from closed
Idle Needle, 2.5 turns from closed
Weight: 7.6oz (215g)
Distance from Backplate to end of Crankshaft: 3.1" (80mm)
Height from Mounting Tab to top of Cylinder Head: 2.9" (73mm)
Center of Mounting Holes Same Side: 0.43" (11mm)
Center of Mounting Holes Opposite Side: 1.2" (31.5mm)
Mounting Hole Diameter: 0.13" (3.3mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (30mm)
Width of Crankcase Below Mounting Tabs: 0.99" (25.2mm)
Width at Mounting Tabs: 1.5" (39mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.49" (12.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 0.90" (23mm)
Diameter of Cooling Head: 1.8" (45mm)
Tuned Pipe Length: 5.3" (135mm)
Tuned Pipe Diameter: 1.2" (32mm)
COMMENTS: Engine available separately, RBDG0405.
jxs 9/25/09
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators