This is the 1/8 scale glow powered, radio controlled,
Associated Factory Team RC8 Off-Road Buggy kit.
FEATURES: Chassis: Milled 0.12" (3mm) hard-coated 7075 aluminum, one-piece top
plate, molded composite front and rear braces
Drive: Four shaft wheel drive, 3.5mm light CVA drivetrain, rear
molded CVA boots
Air Filter: Low profile elliptical high-flow two stage
Fuel Tank: Anti-foaming, easily removed with two clips
Clutch: Machined aluminum racing type, 16 tooth clutch bell
Transmission: Assembled
Ball Bearings: Full set included
Shocks: Four oil-filled Factory Team Big Bore, threaded hard coated
with 4mm TiN stainless steel shock shafts, Factory Team shock oil,
steel alloy stand-offs
Shock Towers: 7075 blue aluminum 0.20" (5mm) thick
Spur Gear: 44 tooth, metal
Gearboxes: Sealed, 4.3:1 ratio
Differentials: Preassembled and filled with Factory Team diff fluid,
split center diff mount for quick access to center diff
Wheels: Factory Team 3.3" (83mm) diameter, 1.7" (42mm) wide white in
color, 17mm hex
Brakes: FFC Free Float Caliper system eliminates unwanted brake drag
heatsink brake discs
Body: Clear untrimmed buggy
Bumpers: Front
Radio Tray: Molded composite with optional forward placement battery
box for increased steering
Caster: Adjustable 14°,16°, or 18° with molded inserts, caster/toe-in
refers to the angle of the front suspension when viewed from the
side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Suspension: Pre-assembled, 7075 blue aluminum mounts with inserts
for easy adjustment of rear toe-in, rear anti-squat and front kick-
up
Steering: Bell crank type with servo saver and optimized geometry for
more consistency and reduced bump-steer
INCLUDES: Associated Factory Team RC8 Buggy kit Factory Team shocks, fully
adjustable wing, pre-assembled front and rear suspension, wheels,
hard-coated threaded shocks with rubber boots, 44T spur gear, clear
body, 16 tooth clutch bell, air filter, decals, instructions
REQUIRES: Radio: 2-Channel with 2
Radio Batteries: (8) AA size
Receiver Battery: 4.8-7.4V flat or hump or 1600-2100 pack
Engine: .21 rear-exhaust
Glow Starter: 1.2 volt
Starter Box
Tires: 1/8 scale buggy
Paint: Lexan specific spray or brush-on
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15%
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 18.5" (470mm)
Width: 12" (305mm)
Height: 7.25" (184mm)
Weight: 7.9 lbs (3570g) approx.
Wheelbase: 12.7" (323mm) wheels on-center front-to-rear
Track: 10.2" (259mm)
Gear Ratio: 4.3:1
Body-
Length: 12.8" (325mm)
Width: 8" (204mm) at widest point
Height: 3.6" (91mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front & Rear Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 8x16mm Front Bulkhead 1 DTXC1585
2 8x16mm Rear Bulkhead 1 DTXC1585
4 15x21mm Front Suspension 2 ASCC6862
4 15x21mm Rear Suspension 2 ASCC6862
2 8x16mm Rear gearbox 1 DTXC1585
2 5x10mm Clutch 1 DTXC1535
jxs 6/10/09
ir/jxs
– If you need more information, use these Associated resources – |
Web Site: http://www.rc10.com/
Phone: 949-544-7500
|
|
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630
|
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
