This is the electric powered, radio controlled, ready to run, 1/18 scale
Brama 18B Buggy from HPI.
FEATURES: Chassis: Molded tub style with front and rear skid plates
Drive: Four wheel shaft drive
Motor: HPI Quark 28T
Pinion Gear: 13 tooth metal
Spur Gear: 55 tooth 0.5M pitch, composite construction
ESC: Reverse and brake equipped
Battery: 7.2V 1100mAh stick pack with red 2-pin connector
Battery Charger: Wall type, four hour charge time
Radio: HPI TF-1 27MHz AM with dual rates, steering and trim
and reverse (transmitter does not have charge jack)
Differentials: Front and rear bevel gear
Shocks: Long stroke oil-filled with adjustable mounting positions
Body: Polycarbonate, trimmed and painted with rear wing
Tires: B-block tread, Front 0.92" (23.5mm) wide, 2.3" (59mm) diameter
Rear 1.02" (26mm) wide, 2.3" (59mm) diameter
Wheels: 5-spoke white Front 0.79" (20mm) wide, 1.6" (41mm) diameter
Rear 0.90"(23mm) wide, 1.6" (41mm) diameter
Camber: Non-adjustable
Caster: Non-adjustable
Warranty: Two year limited through manufacturer beginning at date of
purchase. Warranty valid only in the US, Canada and South America
INCLUDES: Assembled HPI Brama 18B Buggy, Radio, Motor, Tires, Wheels, ESC,
Battery, Charger, Body and Instruction Manual
REQUIRES: AA Batteries: Eight for transmitter
Charging battery for four hours
SPECS: Length: 9.4" (240mm)
Height: 3.9" (100mm)
Width: 6.9" (175mm)
Wheelbase: 6.25" (159mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 4x8mm Fr Hubs 1 DTXC1511
2 8x12mm Fr Hubs 1 DTXC1581
2 4x8mm Driveshaft 1 DTXC1511
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Differentials 2 DTXC1581
jxs 10/22/09
ir/jxs
Click here for Units of Measure Conversion Calculators
|