View Larger Picture

Tower Catalog Page:	115
E-mail This Page To A Friend

            This is the 1/8 scale electric powered, radio controlled,
                  Ofna Hyper 9 E Off Road Racing Buggy Kit.

FEATURES: Chassis: 0.12" (3.2mm) thick CNC aluminum
          Drive: Four wheel shaft with center aluminum drive shaft, front and
            rear universals
          Transmission: Single speed
          Ball Bearings: Full set
          Shocks: Oil-filled, 17mm hard anodized aluminum body with coil
            over spring and Teflon pistons, 0.14" (3.5mm) diameter shafts
          Shock Towers: CNC aluminum 0.16" (4mm) thick
          Radio Tray: Low profile
          Motor Mount: CNC aluminum
          Main Gear: Steel, 40 tooth
          Gearbox: Sealed, both front and rear, not chassis mounted for added
            protection
          Differentials: Front and rear steel planetary gears, oil filled
          Tires: 3.2" (81mm) inner diameter 1.5" (39mm) wide Pro-Line Crime
            Fighter with yellow foam inserts
          Wheels: Pro-Line V2 dish type white in color 3.3" (84mm) diameter,
            1.6" (41mm) wide
          Wing: Molded plastic
          Bumpers: Front high strength
          Suspension: C-hub front, front and rear sway bars
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis, rear toe adjustable from 2-6°
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: 7075 CNC aluminum steering knuckles with servo saver and 3
            position adjustable Ackerman. Ackerman describes the effect of the
            inside front wheel turning tighter than the outside front wheel,
            laydown steeing servo
          Warranty Period: 90 day limited through manufacturer

INCLUDES: Hyper 9 E buggy, with aluminum shocks, tires, motor heat sink, tire
            foam, wheels, spur gear, instructions, clear body and three decal
            sheets

REQUIRES: Radio: 2-channel with one high-torque servo for steering and one
            standard servo for throttle
          AA Batteries: 8 for transmitter
          Motor: Modeler's choice, brushless motor recommended for best
            performance
          ESC: Compatible with selected motor
          Battery: 6-7 cell stick or hump pack
          Battery Charger: Compatible with selected battery
          Misc. Items: Building and track equipment

SPECS:      Vehicle-
          Length:      19.5" (495mm)
          Front Width: 12"   (305mm)
          Rear Width:  12.2" (310mm) maximum
          Height:       7.4" (190mm)
          Weight:       7.27lbs (3300g)
          Wheelbase:   12.5" (322mm)
            Body-
          Length:      13.4" (340mm)
          Width:        7.3" (185mm)
          Height:       3.8" (98mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty   Bearing Set
             2   8x14mm    Center Diff              1     DTXC1583
             4   8x14mm    Fr & R Diff              2     DTXC1583
             2   8x14mm    Front Gearbox            1     DTXC1583
             2   8x14mm    Rear Gearbox             1     DTXC1583
             2   8x14mm    Front Hubs               1     DTXC1583
             2   12x18mm   Front Hubs               1     DTXC1597
             4   8x16mm    Rear Hubs                1     DTXC1585
             4   6x10mm    Servo Saver              2     DTXC1561

                                                                   jxs 06/03/09
                                                                         ir/jxs



– If you need more information, use these Ofna resources –

E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910


 
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators