View Larger Picture

Tower Catalog Page:	107
E-mail This Page To A Friend

          This is the 1/10 scale, electric powered, radio controlled
                       F104 Pro On-Road Racing Car kit.

FEATURES: Chassis: PRO specification 0.12" (3.2mm) thick carbon fiber, 0.079"
            (2mm) thick carbon fiber upper deck
          Drive: Two wheel direct with carbon drive shaft
          Motor: 540 type
          Differential: Ball type with aluminum housing
          Ball Bearings: Full set
          Body: Clear, untrimmed with separate rear wing, side pontoons and
            molded white driver helmet
          Steering: Isometric steering rods links with longitudinally mounted
            steering servo position
          Suspension: Front, kingpin coil with spacers for ground clearance
            adjustment, Rear, T-bar with carbon friction plate and TRF oil-
            filled shock
          Tires: Foam 1.1" (28mm) wide, 2.4" (62mm) diameter
          Wheels: 10 spoke black  1.1" (28.9mm), 1.7" (43mm) diameter
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable

INCLUDES: Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 04
            module spur gear, decals, body, shock oil, instruction manual,
            oil-filled shock and 25 tooth pinion gear

REQUIRES: Radio: 2-channel, small ESC and receiver recommended, standard servo
          Radio Batteries: Eight AA
          Battery: 6-cell stick pack with Tamiya type connector
          Battery Charger: Peak type recommended
          Building and track equipment

SPECS:      Vehicle-
          Length: 16.1" (410mm)
          Width:   7.1" (180mm)
          Wheelbase: 10.6" (270mm)
          Tread: Front, 5.9" (150mm), Rear, 5.7" (145mm) measurement at center
            of wheels, side-to-side
            Body-
          Length: 14.1"  (358mm)
          Width:   4.8"   (122mm) at widest point
          Height:  3.5"   (89mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size         Location           Qty.     Bearing Set
             2   6x10mm       Rear Shaft           1        DTXC1561
             2   8x12mm       Ball Diff            1        DTXC1581
             1   5x11mm       Diff Housing         1        DTXC1547
             4   5x10mm       Front Wheels         2        DTXC1535
             4   5x10mm       Rear Wheels          2        DTXC1535

                                                                    jxs 7/01/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators