View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

This is the radio controlled, electric powered M-05 Pro Chassis Kit from Tamiya
      Compatible with bodies and option parts for Tamiya M-03 chassis.

FEATURES: Chassis: Plastic two piece with extensions to build a short, medium
            or long wheelbase chassis
          Drive: Front wheel
          Ball Bearings: Full set
          Shocks: Oil-filled CVA Super Mini clear bodies with two each TRF
            short springs in soft, medium and hard
          Shock Towers: Composite construction
          Gearbox: Integral with chassis
          Transmission: Single speed
          Differential: Three bevel gear
          Tires: Treaded  60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter
            with foam inserts
          Wheels: 11 spoke white, 0.94" (24mm) wide, 1.5" (38mm) diameter
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Three piece tie-rod linkage with high torque steering
            servo
          Suspension: Front and rear double wishbone

INCLUDES: Tamiya M-05 Pro Chassis Kit, tires, wheels, foam inserts, shocks and
            instruction manual

REQUIRES: Radio: 2-channel with standard size servo
          Electronic Speed Control: Compatible with selected motor
          AA Batteries: 8 for transmitter
          Motor: 540 size
          Battery: 6-cell stick with standard connector
          Battery Charger: Peak type recommended
          Body: Tamiya M-03 or M-05 type
          Building and track equipment

SPECS:    Length: 9" (229mm)
          Width: 6.5" (165mm)
          Wheelbases: 8.3" (210mm), 8.8" (225mm), 9.4" (239mm)
          Tread: 5.4" (138mm) center of wheels, side-to-side
          Gear Ratio: 5.8:1

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             1   5x8mm    Counter Gear                 1   DTXC1523
             1   5x11mm   Counter Gear                 1   DTXC1547
             1   5x8mm    Spur Gear                    1   DTXC1523
             1   5x11mm   Spur Gear                    1   DTXC1547
             2   5x11mm   Output Shaft                 1   DTXC1547
             2   5x11mm   Front Axles                  1   DTXC1547
             2   5x10mm   Rear Axles                   1   DTXC1535

                                                                    jxs 7/07/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators