View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

         This is the 1/10 scale, radio controlled, electric powered
          Tamiya '93 Castrol Celica GT-Four Off-Road Rally Car Kit.

FEATURES: Chassis: DF-03, plastic monocoque .08" (2mm) thick
          Drive: Four wheel shaft drive
          Motor: 540 type
          Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194
          Gearboxes: Sealed
          Differentials: Ball type
          Shocks: CVA Super Mini
          Ball Bearings: Full set included
          Suspension: Two types of rear suspension allow wheelbase adjustment
            also enabling use of short wheelbase 9.9" (251mm) bodies
          Wheels: 5-spoke white in color 1.02" (26mm) wide, 1.9" (47.9mm)
            diameter
          Tires: Off-road rally; 1.02" (26mm) wide, 2.2" (56mm) inner diameter
          Body: Clear lightweight polycarbonate with racing rear wing and
            plastic head and taillight assemblies, two driver figures
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya '93 Castrol Celica rally car, 540 motor, clear body, decals
            29 and 32 tooth pinion gears, 75 and 78 tooth spur gears, ESC,
            instruction manual and window mask sheet

REQUIRES: Radio: 2-channel with one standard servo and electronic speed control
          Radio Batteries: Eight AA for transmitter
          Battery: 6-cell flat with standard Tamiya type connector
          Battery Charger: Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush on

SPECS:      VEHICLE-
          Length:    15.3" (388mm)
          Width:      9.8" (250mm)
          Height:     6"   (152mm)
          Wheelbase: 10.7" (272mm)
          Tread: Front; 8.5" (217mm)
                  Rear; 8" (203mm)
            BODY-
          Length:   17.5"  (444mm)
          Width:     6.9"  (175mm)
          Height:    4.3"  (109mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty.  Bearing Set
             2   10x15mm   Front Diff Gear                1    DTXC1595
             2    5x8mm    Front Diff Gear                1    DTXC1523
             2   10x15mm   Rear Diff Gear                 1    DTXC1595
             2    5x8mm    Rear Diff Gear                 1    DTXC1523
             3    9x5mm    Rear Gear Assembly             2    DTXC1531
             2    5x10mm   Rear Gear Assembly             1    DTXC1535
             1    3x8mm    Rear Gear Assembly             not carried
             2    5x11mm   Rear Axles                     1    DTXC1547
             2    5x11mm   Front Axles                    1    DTXC1547
             2    5x10mm   Front Gear Assembly            1    DTXC1535
             1    3x6mm    Front Gear Assembly            1    DTXC1503
             4    5x8mm    Steering Assembly              2    DTXC1523

                                                                    jxs 3/16/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators