View Larger Picture

Tower Catalog Page:	105
E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
                 Tamiya Buggy Champ 2009 Off-Road Buggy Kit.

FEATURES: Chassis: 0.08" (2mm) thick FRP main frame reinforced with duralumin
            plate
          Drive: Rear wheel
          Motor: 540 type, plastic rollcage encloses motor at rear
          Ball Bearings: Full set included
          Shocks: Oil filled
          Shock Towers (Uprights): Die cast
          Gearbox: Open, clear plastic box over center components
          Transmission: Single-speed
          Tires: Semi pneumatic grooved with block pattern tread
            Front, 0.63" (16mm) wide,   2.7"  (68mm) outer diameter
            Rear,  1.2"  (31mm) wide,   3.2"  (82mm) outer diameter
          Wheels: Five spoke gray, three piece
          Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194
          Body: Molded white plastic and helmeted driver figure, requires
            Tamiya TS series lacquer or equivalent paint
          Bumpers: Front
          Suspension: Die cast front and rear arms, double front trailing arms
            and rear torsion suspension
          Camber Tie Rods: Non-adjustable
          Caster: Non-adjustable
          Steering: Two adjustable shafts with servo saver

INCLUDES: Tamiya Buggy Champ 2009 Buggy Kit, 540 motor, white plastic body, ESC
            tires, wheels, oil-filled shocks, metal roll bar, decals, 20T and
            15T pinion gears and instruction manual

REQUIRES: Radio: 2-Channel with 1 servo
          AA Radio Batteries: Eight for transmitter
          Battery: #55105 LF1100-6.6V racing pack, TAMC8105
          Charger: AC/DC timed or peak for battery
          Paint: Tamiya TS series lacquer or equivalent
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length: 15.7" (400mm)
          Width:   8.3" (210mm)
          Height:  5.9" (150mm)
          Weight:  3.8lbs (1730g)
            BODY-
          Length: 14.4" (365mm)
          Width:   5.9" (151mm) ahead of rear wheels (widest point)
                   2.2" (57mm) ahead of front wheels (narrowest point)
          Height:  4"   (102mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size         Location             Qty    Bearing Set
             2   5x11mm     Final Gear Shaft         1      DTXC1547
             2   5x11mm       Counter Gear           1      DTXC1547
             2   5x11mm       Drive Shaft            1      DTXC1547
             2   5x11mm       Rear Shaft             1      DTXC1547
             4   5x11mm      Front Wheels            2      DTXC1547
             2   5x11mm       Rear Wheels            1      DTXC1547

          Body pictured on the box is painted orange and white with all decals
            applied.

                                                                    jxs 6/18/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators