View Larger Picture

E-mail This Page To A Friend

          This is the 1/10 scale, radio controlled, electric powered
         Tamiya Mitsubishi Lancer Evolution X Off-Road Rally Car Kit.

FEATURES: Chassis: DF-03Ra, plastic monocoque .08" (2mm) thick
          Drive: Four wheel shaft drive
          Motor: 540 type
          Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194
          Gearboxes: Sealed
          Differentials: Ball type
          Shocks: CVA Super Mini
          Ball Bearings: Full set included
          Suspension: Two types of rear suspension allow wheelbase adjustment
            also enabling use of short wheelbase 9.9" (251mm) bodies
          Wheels: 10-spoke, 1.02" (26mm) wide, 1.9" (47.9mm)
            diameter
          Tires: Off-road rally 1.2" (30mm) wide, 2.2" (56mm) inner diameter
          Body: Clear lightweight polycarbonate with inner chassis protection
            cover, chrome head & tail light inserts
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya Mitsubishi Lancer Evolution X rally car, 540 motor, clear
            body, decals, 29 and 32 tooth pinion gears, 75 and 78 tooth spur
            gears, instruction manual

REQUIRES: Radio: 2-channel with one standard servo and electronic speed control
          Radio Batteries: Eight AA for transmitter
          Battery: 6-cell flat with standard Tamiya type connector
          Battery Charger: Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush on

SPECS:      VEHICLE-
          Length:    15.3" (388mm)
          Width:      9.8" (250mm)
          Height:     6"   (152mm)
          Wheelbase: 10.7" (272mm)
          Tread: Front; 8.5" (217mm)
                  Rear; 8" (203mm)
          Gear Ratios 8.22:1, 7.90:1, 7.45:1, 7.16:1 depending on spur and
            pinion gear combo selected
            BODY-
          Length:    17"   (440mm)
          Width:      7.3" (185mm)
          Height:     5"   (130mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty.  Bearing Set
             2   10x15mm   Front Diff Gear                1    DTXC1595
             2    5x8mm    Front Diff Gear                1    DTXC1523
             2   10x15mm   Rear Diff Gear                 1    DTXC1595
             2    5x8mm    Rear Diff Gear                 1    DTXC1523
             3    9x5mm    Rear Gear Assembly             2    DTXC1531
             2    5x10mm   Rear Gear Assembly             1    DTXC1535
             1    3x8mm    Rear Gear Assembly             not carried
             2    5x11mm   Rear Axles                     1    DTXC1547
             2    5x11mm   Front Axles                    1    DTXC1547
             2    5x10mm   Front Gear Assembly            1    DTXC1535
             1    3x6mm    Front Gear Assembly            1    DTXC1503
             4    5x8mm    Steering Assembly              2    DTXC1523

                                                                   jxs 10/06/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators