View Larger Picture

E-mail This Page To A Friend

         This is the 1/10 scale, radio controlled, electric powered
                   Associated RC10R5 Factory Team Oval kit.

FEATURES: Chassis: 0.098" (2.5mm) thick woven carbon fiber chassis allows use
            of NiMH or LiPo cells with indexed battery adjustments for LiPo
            packs
          Motor Mount: Factory Team blue aluminum machined
          Shocks: Side Shocks, Factory Team with through shaft design for equal
            damping with no rebound, Center Shock, VCS2 bladder style
          Center Shock Tower: Woven carbon fiber allows four incremental
            adjustments of rear spring rate
          Ball Bearings: Full set included
          Differential: Ball type with D rings and IRS graphite rear axle
          Bumper: Front foam
          Suspension: Front, carbon fiber front arm mounting plate with
            indexed wheelbase options and 0.020" (0.5mm) trail in right front
            wheel for improved exit steering response
            Rear, 3-point upper pod plate with aluminum stand-off for increased
            stiffness
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Ackerman: Adjustable, Ackerman describes the effect of the inside
            front wheel turning faster than the outside front wheel during
            turns

INCLUDES: Associated RC10R5 Factory Team Oval On-Road Car Kit, shock oil,
            decals and manual

REQUIRES: Radio: Two channel with high-torque steering servo
          R/C Electric Motor
          Electronic Speed Control: To handle selected motor
          Battery Pack: 4-6 cell NiMh battery pack or 1-3 cell LiPo battery
            pack
          Pinion Gear: 64 pitch pinion gear (size to be determined by type and
            wind of motor selected)
          Body: 1/10 scale oval race car type
          Tires and Wheels: 1/10 scale oval foam type
          Building and track equipment

SPECS:    Length: 273mm (10.7")
          Track Width Front: 195mm (7.68")
          Track Width Rear: 205mm (8.07")
          Weight: 565g (19.9 oz) without electronics
          Wheelbase Right: 262.75mm-270.25mm (10.34"-10.64")
                           0.5mm (0.02") trail std
          Wheelbase Left: 260.75mm-270.75mm (10.27"-10.66")
          Internal Gear Ratio: 1:1

                                                                    jxs 6/10/09
                                                                         ir/jxs



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators