Eligible: Yours for 3 Easy Pay payments of $63.33
Select Easy Pay Plan during checkout.

View Larger Picture

On-line Videos:	Video 1 (28.3 MB)
Tower Catalog Page:	171
E-mail This Page To A Friend

          This is the Futaba 3-Channel 3PMX Computer Radio with the
                             2.4GHz FASST System.
          Transmitter and R603FF receiver only, servos not included.
            The 3PMX is also capable of using the R603FS receiver
            to give modelers special Dual Antenna Diversity (DAD).

      **The 3PMX adds three new features; Four Wheel Steering Mixing,**
       **Digital Trim Step and Adjuster for Crawlers, Monster Trucks**
     **and any four wheel drive vehicle. These features allow drivers**
       **to apply mixing between steering, throttle and channel 3.**

FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as
            much information to the receiver at eight times the resolution of
            standard systems for unsurpassed control and smooth servo travel
          2.4GHz circuitry is wired directly into transmitter eliminating
            separate plug-in modules
          "Auto Detect" instantly determines whether HRS or PPM mode is active
            in the transmitter
          Special ID code prevents signal interruption by rejecting unwanted
            signals
          Brake mixing for large cars
          Anti-skid braking system (ABS)
          Throttle Acceleration (ACC) minimizes time lag before clutch and
            brakes are connected in gasoline engine cars
          Steering speed adjusts steering servo operating speed
          Racing timer
          Function select lever function
          In addition to great performance in R/C car and truck applications,
            this system is also ideally suited to the rigors of boat racing
          10 Model Memory
          One year limited warranty through manufacturer

INCLUDES:  2.4GHz FASST Futaba 3-Channel 3PMX transmitter
           2.4GHz FASST Futaba R603FF 3-Channel Receiver (FUTL7631)
           ON/OFF switch harness
           Instruction manual

REQUIRES: AA Batteries: Eight for transmitter
          Servos of modeler's choice

SPECS:    Transmitter;
            Current Drain: 250mA or less
            Transmitting Antenna: 2.4GHz

          Receiver;
            Reception Antenna: External
            Power Requirement: 6V NiCd battery
            Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm)
            Weight 0.45oz (12.8g)

                                                                   jxs 01/18/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators