View Larger Picture

Tower Catalog Page:	141
E-mail This Page To A Friend

            This is the Novak Goat 3S Electronic Speed Control for
                     Brushless and Brushed Crawler Motors.

FEATURES: Operates on 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
          Crawling specific software with Zero Reverse Delay for quick response
            in forward and reverse and Worm-Drive Profile for vehicles that do
            not require electronic drag brakes
          Fully programmable, user-friendly interface with six adjustable
            parameters: Drag Brake (10 settings), Dead Band (5 settings),
            Minimum Drive (5 settings), Drive Frequency in brush mode
            (7 settings) LiPo Cut-Off and Reverse Motor Rotation
          Specially designed MOSFET for greater effectiveness in 3S LiPo
            applications
          Water resistant case with gasket seal
          Sensor-based for excellent braking and low-speed driveability
          Auto detect brushed motor mode, locked rotor detection and thermal
            overload protection
          120 limited warranty through manufacturer

INCLUDES: Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans
            Cap Module, 14G Power Wires, Tamiya style JST Battery Connector,
            Cooling Fan, Input Harness, External BEC Module for 3S applications
            Instructions, Double Sided Tape

REQUIRES: Motor such as the Novak Crawler Series (NOVC3414, NOVC3419, NOVC3420
            Forty Five (NOVC3545), Fifty Five (NOVC3555) or the Novak SS Pro
            series motors

SPECS:    Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
          Size: 1.18 x 1.54" (30 x 39.1mm)
          Weight: 1.50oz. (42.6g) without wires
          Design: Sensor-based
          Motor Limit: 13.5-turn (2S Li-Po) and 18.5-turn (3S Li-Po)
            Novak 540-size sensored brushless 27-turn (2S Li-Po)
            and 33-turn (3S Li-Po) 540-sized brush motor
          On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp.
          BEC: 6.0 volts DC / 5.0 amps
          External BEC: 6.0 volts DC/3.0 amps switching regulator
          Rated Current: 150 Amps @ 25°C trans. temp.
          Braking Current: 150 Amps @ 25°C trans. temp.
          Status LEDs: 4
          Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off
            Circuitry is enabled)
          Power Wires: 14G Super-Flex Copper-Strand Silicone Wire

                                                                    jxs 8/19/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators