This is the Novak Crawler 13.5 Turn Sintered Brushless Motor.
FEATURES: Designed for rock racing where not only agility but speed is
essential
Ideally compatible with Novak's Goat 3S ESC (NOVM3214) when using a
2S pack as well as the original 2S LiPo Goat Crawler ESC
(NOVM3219)
Sensor-based technology for lots of starting torque, low speed
driveability and low cogging for smooth acceleration and coasting
High strength rotor and larger, more rugged front bearing for extra
durability and long life
Oversized front bearing for extra durability and extended life
Aluminum ribbed end bells for additional cooling
Low resistance Direct-Solder Wiring Tabs for flexible soldering
options
120 day limited warranty through manufacturer
INCLUDES: 13.5 Turn Sintered Crawler Motor with connector and instruction
sheet
REQUIRES: Brushless electronic speed control such as the Novak Goat 3S or Goat
2S Crawler ESCs
SPECS: Number of Turns: 13.5
Design: Sensor-based
Input Voltage: 4-7 cells (1.2V/cell) or 2S cells
Watts: 195
KV (unloaded): 3,300 RPM/Volt
Motor Size: 2.08"L X 1.41"D (52.8mm x 35.8mm) 540 size
Shaft Diameter: .0125" (3.2mm)-accepts all existing pinion gears
Motor Weight: 6.61 oz. (187 grams)
Bearing: Oversized (1/2" x 3/16" Front, Standard Rear (3/8" x 1/8")
Magnet: One-piece multi-pole cylindrical high-strength sintered
Neodymium
jxs 08/19/09
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
