View Larger Picture

E-mail This Page To A Friend

                 This is the Futaba GY520 Heading Hold Gyro
           and S9254 Digital Coreless High Torque Helicopter Servo.

FEATURES:   Gyro-
          Ultra small and light weight gyro contained in one unit-no separate
            sensor and control unit
          Utilizes a high speed advanced PID (Proportional-Integral-
            Derivative) control algorithm
          Latest MEMS (Micro-Electro-Mechanical Systems) allows complete
            control system on one chip
          Delivers superior performance with analog servos and excels with
            digital servos
          F3C and 3D mode selectable, six programmable parameters
          Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in
            the 760uS mode
          Programmable through single button and multi-color LED or through a
            PC using Futaba CIU-2 USB adapter
          Registered AVCS (Angular Velocity Control System) architecture
            achieves unmatched tail holding ability

            Servo-
          Coreless motor for reduced weight and high-speed response
          Digitally enhanced microprocessors cut the response time in half
            from transmitter input to servo reaction
          Dual ball bearing gear train
          Dust and water resistant-not water proof
          Nylon gears and black plastic case
          One year limited warranty on both components beginning at date of
            purchase

INCLUDES: Futaba GY520 Heading Hold Gyro, instruction manual, one each 13"
            (330mm) lead with red connectors and lead with black connectors
            two sections of sensor tape, mini screwdriver and instruction
            manual
          S9254 Servo, round wheel, six arm servo horn, four arm servo horn,
            four eyelets, mounting screws, and four rubber grommets

REQUIRES: Installing in heli

SPECS:      Gyro-(FUTM0810)
          Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)
          Weight: 0.243 oz (6.9g)
          Voltage Range: 3.8 - 6.0V DC
          Control System: Advanced PID control
          Current Draw: 40mA (without servo)
          Sensor: MEMS vibrating structure gyro
          Operating Temperature: 14°F - 113°F (-10°C - +45°C)
          Sensor Rate Range: +/- 800° sec
          Angular Velocity Range: +- 800 deg/sec
            Servo-(FUTM0224)
          Speed:        0.06 sec/60° @ 4.8V
          Torque:       47 oz-in @ 4.8V
          Dimensions: 1.6  x 0.8 x 1.4" (40 x 20 x 37mm)
          Weight:       1.7oz (49g)
          Power Supply: 4.8V (Futaba does NOT recommend using 6V)

                                                                   jxs 10/09/09
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators