E-mail This Page To A Friend

                  This is the Futaba GY520 Heading Hold Gyro
                    with the BLS254 Digital Brushless Servo.

FEATURES:   GY520 Gyro-(FUTM0810)
          Ultra small and light weight gyro contained in one unit-no separate
            sensor and control unit
          Utilizes a high speed advanced PID (Proportional-Integral-
            Derivative) control algorithm
          Latest MEMS (Micro-Electro-Mechanical Systems) allows complete
            control system on one chip
          Delivers superior performance with analog servos and excels with
            digital servos
          F3C and 3D mode selectable, six programmable parameters
          Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in
            the 760uS mode
          Programmable through single button and multi-color LED or through a
            PC using Futaba CIU-2 USB adapter
          Registered AVCS (Angular Velocity Control System) architecture
            achieves unmatched tail holding ability
            BLS254 Servo-(FUTM0524)
          Designed for 3D helis
          Standard size
          Equipped with two ball bearings
          30% faster response than standard digital servos and five times
            longer lasting than servos with brushed motors
          Same power consumption as brushed digital servos
          One year limited warranty on both components beginning at date of
            purchase.

INCLUDES: Futaba GY520 Heading Hold Gyro, instruction manual, one each 13"
            (330mm) lead with red connectors and lead with black connectors
            two sections of sensor tape, mini screwdriver, manual
          Futaba BLS254 Brushless Heli Rudder Servo with universal connector
            (21mm) diameter round horn, 1.8" (45mm) diameter round horn 1.2"
            (32mm) diameter 6-point horn, 1.5" (38.8mm) diameter 4-point horn
            mounting screws, eyelets and grommets
REQUIRES: Installing in helicopter and programming following instructions in
            manual

SPECS:      GY520 Gyro-
          Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)
          Weight: 0.243 oz (6.9g)
          Voltage Range: 3.8 - 6.0V DC
          Control System: Advanced PID control
          Current Draw: 40mA (without servo)
          Sensor: MEMS vibrating structure gyro
          Operating Temperature: 14°F - 113°F (-10°C - +45°C)
          Sensor Rate Range: +/- 800° sec
          Angular Velocity Range: +- 800 deg/sec
            BLS254 Servo-
          Torque: 53 oz-in (3.8kg/cm) @ 4.8V
          Speed: 0.06 sec/60° @ 4.8V
          Size: 1.60 x 0.80 x 1.50" (40 x 20 x 36.8mm)
          Weight: 1.80 oz (51g)

                                                                    jxs 9/29/09
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators