View Larger Picture

E-mail This Page To A Friend

                 This is the nitro powered, radio controlled
            2WD Custom Works Intimidator GSX-2 Dirt Oval Racer Kit.

FEATURES: Chassis: High strength, carbon fiber construction 0.12" (3mm) thick,
            adjustabe wheelbase
          Shocks: Custom Works MDX aluminum body
          Shock Towers: High strength, carbon fiber construction
          Transmission: Racing laydown type, single speed with 2.60 ratio
          Fuel Tank: 2.5oz (75cc) with flip top cap
          Clutch: Two shoe
          Clutch Bell: Steel construction with 23 tooth aluminum pinion
          Spur Gear: 60 tooth, black nylon construction
          Differential: Ball diff type
          Steering: Rack type with links
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Custom Works Intimidator GSX-2 Dirt Oval Racer Kit, 75cc fuel tank,
            23 tooth bell pinion, 60 tooth spur gear, shocks, ball bearings and
            instructions

REQUIRES: Engine: .12 cu in rear exhaust
          Exhaust: Header and tuned Pipe
          Radio: 2-channel with 2 standard size servos
          Radio Batteries: Eight AA cells
          Receiver Battery: 5-cell rechargeable
          Body: Wedge style - CSWC9008
          Tires: 2" street track, CSWC6204 front, CSWC6214 rear
          Wheels: 2" CSWC6252 front, CSWC6253 rear
          Building and Track Equipment: Glow starter, shock oil, tools and more

SPECS:    Dimensions and weight not provided by manufacturer
          Transmission Ratio: 2.60:1
          Final Drive Ratio: 6.78:1 (with included pinion and spur combo)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size        Location                        Bearing Set Qty.
             4   3/16x3/8"   Front Wheels                       DTXC1423   2
             4   3/16x3/8"   Rear Hubs                          DTXC1423   2
             2   5/32x5/16"  Diff gear and outdrive             DTXC1411   1
             4   3/16x3/8"   Gearbox                            DTXC1437   2
             2   3/8x5/8"    Gearbox                            DTXC1437   1
             1   3/16x3/8" Flanged Outer Clutch Assembly        CSWC4438   1
             1   5x10mm      Inner Clutch Assembly              DTXC1535   1

                                                                    jxs 7/20/09
                                                                         ir/jxs



– If you need more information, use these Custom Works resources –

E-mail: customworkstech@aol.com
Web Site: http://www.customworksrc.com/
Phone: 704-489-8147


 
Postal Address:
Custom Works
760-B CROSSPOINT DRIVE
DENVER, NC 28037  








Click here for Units of Measure Conversion Calculators