View Larger Picture

E-mail This Page To A Friend

                 This is the Futaba GY520 Heading Hold Gyro
          and S9257 Digital High Speed Helicopter Rudder Mini Servo.

FEATURES:   Gyro-
          Ultra small and light weight gyro contained in one unit-no separate
            sensor and control unit
          Utilizes a high speed advanced PID (Proportional-Integral-
            Derivative) control algorithm
          Latest MEMS (Micro-Electro-Mechanical Systems) allows complete
            control system on one chip
          Delivers superior performance with analog servos and excels with
            digital servos
          F3C and 3D mode selectable, six programmable parameters
          Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in
            the 760uS mode
          Programmable through single button and multi-color LED or through a
            PC using Futaba CIU-2 USB adapter
          Registered AVCS (Angular Velocity Control System) architecture
            achieves unmatched tail holding ability

            Servo-
          Specifically designed for heli rudder operation
          Equipped with two ball bearings
          30% faster response than standard digital servos

INCLUDES: Futaba GY520 Heading Hold Gyro, instruction manual, one each 13"
            (330mm) lead with red connectors and lead with black connectors
            two sections of sensor tape, mini screwdriver and instruction
            manual
          S9257 High Speed Digital Servo with .83" (21mm) diameter round horn
            1.5" (39mm) diameter four-point horn, 1.2" (32mm) diameter six-
            point horn, mounting hardware

REQUIRES: Installing in heli

SPECS:      Gyro-(FUTM0810)
          Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)
          Weight: 0.243 oz (6.9g)
          Voltage Range: 3.8 - 6.0V DC
          Control System: Advanced PID control
          Current Draw: 40mA (without servo)
          Sensor: MEMS vibrating structure gyro
          Operating Temperature: 14°F - 113°F (-10°C - +45°C)
          Sensor Rate Range: +/- 800° sec
          Angular Velocity Range: +- 800 deg/sec
            Servo-(FUTM0667)
          Dimensions: 1.4 x 0.6 x 1.1" (36 x 15 x 29mm)
          Weight:  .92oz (26g)
          Torque: 28 oz-in (2.0 kg-cm) at 4.8V
          Operating Speed: 0.08 sec/60° at 4.8V
          Lead Length: 7.9" (200mm)

                                                                   jxs 10/09/09
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators