This is the Ballistic Spec Brushless 13.5 Turn Motor from Novak.
FEATURES: Completely rebuildable allowing upgrades or replacement of various
parts
Easy to adjust timing assembly
Meets ROAR and specifications
Oversized front bearing 1/2 x 3/16" (12.7 x 4.8mm) for increased load
handling and bearing life
12.3mm nickel-plated sintered neodymium rotor for maximum
performance in high-temperature conditions
0.125" (3.2mm) pinion shaft accepts all existing pinion gears
Sensor-based for excellent torque and low-speed driveability
Compatible with the Novak GTB, Slyder and Havoc 3S electronic speed
controls
Color-coded hand wound stator identifies number of motor winds
Heavy duty solder tabs
120 day limited warranty through manufacturer
INCLUDES: Ballistic Spec Brushless 13.5 Turn Motor with sensor wire and
instruction sheet
REQUIRES: Installing in vehicle and connecting to ESC
SPECS: Watts: 195
kV: 3,300 RPM/volt (unloaded)
Color-Coded Stator: Orange
Maximum RPM: 50,000
Sensor Harness Length: 9" (230mm)
Motor Size: 2.07 x 1.41" (52.6 x 35.8mm) (540 size)
Motor Weight: 6.6oz (187g)
Shaft Diameter: 0.125" (3.2mm)
COMMENTS: The Ballistic Spec Brushless series is available in the following
turns;
10.5T NOVC3610 17.5T NOVC3617
13.5T NOVC3613 21.5T NOVC3621
jxs 8/19/09
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
