View Larger Picture

E-mail This Page To A Friend

          This is the radio controlled, electric powered, 1/8 scale
                  Ultra LX-1e Buggy 80% Pre-Assembled Roller.
                      Radio, ESC and Motor not Included.

FEATURES: Chassis: CNC machined 0.12" (3mm) thick with hard anodized aluminum
            front and center top plates, plastic stone guards and steel rear
            brace
          Drive: Four wheel shaft
          Differential: Three planetary gear type with CNC center diff mount
          Ball Bearings: Full set, 18 total
          Spur Gear: 51 tooth molded composite plastic
          Motor Mount: One-piece CNC
          Battery Tray: Molded tray supports 2S to 4S LiPo batteries
          Suspension: C-hub design with front and rear stabilizer bars
          Wheels: Ultra light 3.2" (82mm) diameter, 1.6" (42mm) wide, white in
            color, 17mm hex
          Tires: High grip bones, 4.5" (115mm) diameter, 1.57" (40mm) wide with
            foam inserts
          Body: Painted and trimmed buggy body with high downforce wing
          Shocks: Oil filled 13mm hard coated aluminum bodies
          Shock Towers: 0.16" (4mm) thick anodized aluminum
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: Ofna Ultra LX-1e Buggy 80% Pre-Assembled Roller, body, wing, decals
            tires, wheels and instruction manual

REQUIRES: Radio: 2-channel with high-torque steering servo
          Motor: Brushless motor for best performance, Ofna recommends the
            Mamba Monster Brushless Power System with 2650kV Motor and
            Programmable ESC, CSEC6202
          Battery: 2S to 4S LiPo
          Battery Charger: LiPo compatible
          Building and track equipment

SPECS:      Vehicle-
          Length: 19" (483mm)
          Width:  12" (305mm)
          Height:  7" (178mm)
          Wheelbase: 12.9" (330mm)
          Weight: 6lbs (2722g)
            Body-
          Length: 14.7" (374mm)
          Width:   7.9" (200mm) at widest point
          Height:  4.2" (108mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2   7x19mm    Front Diff                  1   DTXC1579
             2   7x19mm    Rear Diff                   1   DTXC1579
             2   7x19mm    Center Diff                 1   DTXC1579
             2   6x13mm    Fr Gear Case                1   DTXC1573
             2   6x13mm    Rear Gear Case              1   DTXC1573
             4   8x16mm    Fr Knuckle Arms             2   DTXC1585
             4   8x16mm    Rear Hubs                   2   DTXC1585

                                                                    jxs 8/14/09



– If you need more information, use these Ofna resources –

E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910


 
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators