View Larger Picture

E-mail This Page To A Friend

            This is the glow powered, radio controlled, 1/8 scale
                  Preassembled MBX6 M-Spec Buggy from Mugen.

FEATURES: Chassis: A7075 T6 aluminum 0.12" (3mm) thick
          Drive: Four wheel three differential shaft drive
          Shocks: Four oil filled aluminum body
            Front; 450wt oil 10T super soft springs
            Rear; 400wt oil 11T super soft springs
          Shock Towers: 0.16" (4mm) thick carbon graphite
          Gearbox: Sealed, front and rear
          Differentials: Three, planetary geared
          Fuel Tank: 5.1oz (150cc) approximate
          Transmission: Single-speed
          Ball Bearings: Full set
          Suspension: Pillow ball
          Body: Clear buggy type
          Clutch: 3-shoe aluminum
          Clutch Bell: 13 tooth steel
          Spur Gear: 46 tooth
          Wheels: Pro-Line White 1.6" (41mm) wide, 3.1" (79mm) diameter
          Tires: Pro-line #9030 Cailber dual stage pin design, 3.1" (79mm)
            diameter, 1.7" (43mm) wide with inserts
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type, with carbon graphite steering brace and
            adjustable Ackerman. Ackerman describes the effect of the inside
            front wheel turning faster than the outside front wheel during
            turns

INCLUDES: Mugen MBX6 M-Spec Buggy with clear buggy body, white plastic rear
            wing, decal sheet, wheels, tires, foam inserts, air filter
            illustrated instruction manual,

REQUIRES: Engine: .21 cu in rear exhaust
          Exhaust: Tuned pipe with manifold
          Radio: 2-channel with standard servo for throttle and high torque
            servo for steering
          Starter Box: For 1/8 scale buggy use
          Building and track equipment

SPECS:      Vehicle
          Length: 17.75" (451mm)
          Width: 18.9" (480mm)
          Wheelbase: 12.4 - 12.6" (315 - 320mm)
          Gear Ratio: 11.98:1
          Weight: 7.4lb (3,370g)
            Body-
          Length: 14.6" (370mm)
          Width:   6.9" (177mm)
          Height:  3.9" (101mm)

COMMENTS: For replacement Ball Bearings use:
            Qty.  Size      Location            Qty.  Bearing Set
             6   8x16mm    Fr/R/Center Diffs     3     DTXC1585
             4   8x16mm    Fr/R Gear Cases       2     DTXC1585
             2   8x16mm    Front Hubs            1     DTXC1585
             2   15x21mm   Front Hubs            1     ASCC6862
             2   8x16mm    Rear Hubs             1     DTXC1585
             2   15x21mm   Rear Hubs             1     ASCC6862
             2   5x10mm    Clutch Bell           1     DTXC1535

                                                                    jxs 9/28/09
                                                                         ir/jxs



– If you need more information, use these Mugen resources –

E-mail: support@mugenseiki.com
Web Site: http://www.mugenracing.com/
Phone: 949-707-5607


 
Postal Address:
Mugen
20525 CRESCENT BAY DRIVE
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators