E-mail This Page To A Friend

   This is the 1/10 scale electric powered, radio controlled, ready to run
                Tamiya Repsol Mitsubishi Ralliart Racing Lancer.

FEATURES: Chassis: DF-01 lightweight plastic bathtub type
          Drive: Four wheel shaft driven
          Radio: Tamiya Expec SP 2-channel 27MHz AM with steering and throttle
            trims and reverse and standard size steering servo
          Motor: 540 type
          Shocks: Oil filled, plastic body
          Lights: Tamiya TLU-01 (TAMC1394) LED light unit with two white and
            two red 5mm LED lights, see COMMENTS
          Suspension: Double wishbone
          Electronic Speed Control: Tamiya TEU-101BK, TAMM3194 with reverse
          Gearboxes: Sealed
          Differentials: Planetary gear
          Wheels: Black in color, one-piece 1.02" (26mm) wide, 2.04" (52mm)
            diameter
          Tires: Off-road 1.02" (26mm) wide, 3.1" (78mm) diameter
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Body: Lightweight polycarbonate

INCLUDES: Tamiya Repsol Mitsubishi Ralliart Racing Lancer, painted body, 540
            motor, radio, ESC, decals, instruction manual, head and tail lights

REQUIRES: Radio Batteries: 8 AA for transmitter
          Battery: 6 cell stick pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery

SPECS:      Vehicle-
          Length: 16.8" (427mm)
          Width:   8"   (204mm)
          Height:  7.5" (190mm)
          Weight:  2.7lbs (1220g)
            Body-
          Length: 17.3" (439mm)
          Width:   7.5" (190mm)
          Height:  5.5" (140mm)

COMMENTS: The TLU-02 Light Control Unit (not included) can be installed for
            more light effects, order TAMC1477.

          For Replacement Ball Bearings use:
             Qty.  Size      Location                Qty. Bearing Set
              2   5x11mm     Rear Gearbox             1   DTXC1547
              2   5x11mm     Front Gearbox            1   DTXC1547
              1   5x11mm     Spur Gear                1   DTXC1547
              1   5x8mm      Spur Gear                1   DTXC1523
              2   5x8mm      Idler Gear               1   DTXC1523
              4   5x11mm     Rear Hubs                2   DTXC1547
              4   5x11mm     Front Hubs               2   DTXC1547
              1   5x11mm     Counter Gear             1   DTXC1547
              1   5x8mm      Counter Gear             1   DTXC1523

                                                                   jxs 10/06/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators