E-mail This Page To A Friend

                This is the nitro powered, radio controlled 2WD
                 Custom Works Enforcer GSX2 Dirt Oval Racer Kit.

FEATURES: Chassis: High strength, carbon fiber construction (4mm thick)
          Roll Cage: Injection molded nylon construction, white in color
          Body: Four clear Lexan panels
          Shocks: Four coil-over large volume with threaded, anodized blue
           aluminum bodies (50wt shock oil included)
          Shock Towers: High strength, carbon fiber construction, adjustable
            rear tower allows easy adjustment od car width and ride height
          Transmission: Racing GT type, single speed with 2.60 ratio
          Fuel Tank: 2.5oz (75cc) with flip top cap
          Clutch: Two shoe
          Clutch Bell: Steel construction with 23 tooth aluminum pinion
          Spur Gear: 66 tooth, 32 pitch
          Differential: Ball type
          Steering: Rack type with links
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Custom Works Enforcer GSX2 Dirt Oval Racer Kit, lexan body panels,
           wing, side dams, braces and mounting brackets, 2.5oz (75cc) fuel
           tank, 23 tooth bell pinion, 60 tooth spur gear and instruction
           manual

REQUIRES: Engine: .12 cu in rear exhaust, slide valve (clutch parts for either
           a threaded shaft or pilot shaft type engine are included)
          Exhaust: Header and Tuned Pipe
          Tires: Street track design, CSWC6204 front and CSWC6214 rear
          Wheels: Black nylon dish design CSWC6252 front and CSWC6253 rear
          Radio: 2-channel with 2 standard size servos
          Radio Batteries: Eight AA cells
          Receiver Battery: 5-cell rechargeable

          Building and Track Equipment

SPECS:    Dimensions and weight not provided by manufacturer
          Transmission Ratio: 2.60:1

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size        Location                        Bearing Set Qty.
             4   3/16x3/8"   Front wheels                       DTXC1423   2
             4   3/16x3/8"   Rear Hubs                          DTXC1423   2
             2   5/32x5/16"  Diff gear and outdrive             DTXC1411   1
             4   3/16x3/8"   Gearbox                            DTXC1437   2
             2   3/8x5/8"    Gearbox                            DTXC1437   1
             1   5x10mm      Clutch Bell Inner Bearing          DTXC1541   1
             1   3/16x3/8"   Clutch Bell Outer Flanged Bearing  CSWC4439   1

COMMENTS: The use of a remote glow plug kit is suggested (MODP1221). Without
           the use of this kit the wing will have to be removed for access to
           the glow plug.

                                                                   jxs 10/05/09
                                                                         ir/jxs



– If you need more information, use these Custom Works resources –

E-mail: customworkstech@aol.com
Web Site: http://www.customworksrc.com/
Phone: 704-489-8147


 
Postal Address:
Custom Works
760-B CROSSPOINT DRIVE
DENVER, NC 28037  








Click here for Units of Measure Conversion Calculators