View Larger Picture

E-mail This Page To A Friend

 This is the brushless electric powered, 2.4GHz radio controlled, ready to run
           1/10 scale Traxxas Slash VXL Short Course Racing Truck.

     **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Nylon composite construction
          Drive: Four wheel with lightweight extruded aluminum shaft
          Radio: Traxxas TQ 2.4GHz with 4-channel mini receiver

          Electronic Speed Control: Traxxas Velineon VXL 3S

          Motor: Traxxas Velineon 3500 with ultra high temperature
            Neodymium magnets and high speed ball bearings
          Spur Gear: 54 tooth, 0.8 module 32 pitch
          Pinion Gear: 13 tooth
          Battery: Traxxas Power Cell 8.4V 3000mAh 7-cell with high-current
            connector
          Battery Charger:
          Body: Painted and trimmed

          Bumpers: Front and rear, composite construction
          Shocks: Traxxas Ultra oil filled with high-volume body, silicone
            bladders, dual X-ring seals and progrssive springs
          Suspension: C-hub design

          Transmission: Ball bearing equipped with adjustable Torque-Control
            slipper clutch with finned aluminum alloy pressure plates
          Differentials: Revo-spec sealed silicone filled planetary gear type
          Ball Bearings: Rubber sealed
          Caster: Adjustable caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Tires: Mud-Terrain, with foam inserts 1" (26mm) wide, 2.6" (67mm)
            diameter
          Wheels: Beadlock style split spoke with chrome center and color
            molded outer rim to simulate beadlock, 12mm hex
          Steering: Dual bellcrank pivoting on rubber sealed bearings
            with integrated cam-type servo saver, waterproof digital high-
            torque (125 oz-in) servo

INCLUDES:

REQUIRES: AA Cells: Eight for transmitter

SPECS:      Vehicle-
          Length:          22.36" (568mm)
          Width:           11.65" (296mm)
          Height:           8.42" (214mm)
          Front and Rear Track: 11.65" (296mm) distance between outer edges of
            wheels side-to-side
          Ground Clearance: 2.5"
            Body-
          Length:
          Width:

          Height:

COMMENTS: The Traxxas Slash VXL is available in the following paint schemes;
            TRAD11LR Black/Red, Mike Jenkins edition
            TRAD11RL Red/Black, Mark Jenkins edition (color scheme is exactly
              the same as the Black/Red Mike Jenkins edition with a different
              number on the body)
            TRAD11SL Silver/Black, Mike Oberg edition
            TRAD11YB Yellow/Blue, Jerry Whelchel edition

          The ball bearings in the 1/10 Traxxas Slash VXL are rubber sealed.
          Following are the stock numbers for the replacement bearings from
            Traxxas and non-rubber sealed alternatives from Duratrax;
            Qty.  Size         Location             Qty.    Bearing Set



– If you need more information, use these Traxxas resources –

E-mail: support@traxxas.com
Web Site: http://www.traxxas.com/
Phone: 888-872-9927


 
Postal Address:
Traxxas
1100 KLEIN RD
PLANO, TX 75074  








Click here for Units of Measure Conversion Calculators