View Larger Picture

E-mail This Page To A Friend

            This is the 1/8 scale glow powered, radio controlled,
       HPI Savage X SS off-road Monster Truck Kit with the K5.9 Engine
                           and clear Nitro GT-2 Body.

FEATURES: Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
          Drive: Four wheel shaft drive with heavy duty dogbones
          Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and
            piston construction, three needle composite bodied slide valve
            carburetor with 9.5mm inlet, dual stage air filter, starts with
            included HPI Roto Start 2 shaft drive electric starter, one-piece
            engine mount and 0.12" (3mm) mounting plate
          Exhaust: Polished aluminum two-chamber tuned pipe and polished
            aluminum manifold
          Fuel Tank: 5.4oz (160cc), flip top cap
          Clutch: Three shoe
          Transmission: Two-speed with adjustable slipper clutch and heavy
            duty metal gears
          Ball Bearing: Full set of rubber sealed bearings
          Shocks: Eight oil-filled, long stroke with coil-over spring
          Main Gear: Steel, 47 tooth
          Gearbox: Sealed front and rear
          Differentials: Four gear planetary type with heavy duty diff shafts
            and alloy cases
          Brakes: Adjustable dual vented stainless steel discs
          Tires: Dirt Bonz, diameter: 5.71" (145.1mm), width 3.38" (85.8mm)
            sticky S compound with bone shaped tread for high traction on dirt
          Wheels: Chrome Warlock with 17mm hex, width: 2.2" (56mm), diameter
            3.3" (83mm)
          Body: Pre-trimmed unpainted Nitro GT-2 with pre-cut decals
          Bumpers: High impact nylon front and rear skidplate type
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Suspension: Front and rear heavy duty reinforced suspension arms
            uprights and knuckles, wide track (nearly 17") (432mm) design
          Steering: Bell crank
          Servo Saver: Adjustable cam type for optimum steering response and
            extra servo gear protection
          Warranty: Two year limited, valid only in USA, Canada and South
            America

INCLUDES: HPI Savage X SS Monster Truck kit with oil shocks, clear body,
            decals, tires, foam inserts, 6 spoke chrome wheels, 17 tooth
            clutch bell, 47 tooth spur gear, instructions, Nitro Star K5.9
            engine and instruction manual

REQUIRES: Radio: 2-Channel with 1 standard servo for throttle, 1 high torque
            servo for steering, and 1 standard size and torque servo if
            the optional reverse module (HPIC8739) is purchased.
          *If using the optional reverse module a 3-channel radio must be used.
          Radio Batteries: (8) AA size
          Receiver Pack: 6V 5-cell hump configuration
          Wall Charger: For receiver pack
          Glow Starter: 1.2V
          Paint: Polycarbonate for body
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-stroke glow fuel with 20% nitromethane, 16% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life. In the
            past, the conventional lubricant content used in fuel was 18%. But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower. These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length:     21"    (533mm)
          Width:      16.8"  (427mm)
          Height:     10"    (254mm)
          Wheelbase:  13.25" (336mm) wheels on-center front-to-rear
          Suspension Travel: 6" (152mm)
          Tires: diameter: 5.71" (145.1mm), width 3.38" (85.8mm)
            Body-
          Length:     19.2"  (488mm)
          Width:       8.7"  (221mm) at rear wheels, widest point
                       7.2"  (184mm) behind from wheels, thinnest point
          Height:      4.9"  (125mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty Bearing Set
             4    8x16x5  FR & R gearboxes                2  DTXC1585
             3   10x16x5  FR, CTR & R Diffs               2  HPIC2032
             5    6x13x5  CTR gearbox                     3  DTXC1573
             1    8x16x5  CTR gearbox                     1  DTXC1585
             2    5x10x4  Clutch                          1  DTXC1535
             4    8x16x5  FR uprights (wheels)            2  DTXC1585
             4    8x16x5  R uprights (wheels)             2  DTXC1585

                                                                   jxs 10/16/09
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators