This is a tuned pipe adapter (also called an exhaust manifold), which
is used to adapt a tuned pipe to an engine. This adapter is a piece of metal
tubing that turns 90 degrees towards the rear of the engine. At the end of this
adapter you will install the piece of silicone tubing (called a tuned pipe
coupler, one is INCLUDED with this adapter). The tuned pipe will then fit
into the silicon coupler. The tuned pipe is "tuned" by moving th pipe in or
out of the silicon coupler until one achieves maximum power and RPM.
This adapter measures 1-5/8" from the center of the outlet pipe to the outside
of the adapter where it attaches to the engine.
This tuned pipe adapter will fit the following engines:
Supertiger S-40K, S-45K, GS-40, GS-45, G-51
.
NOTE: This adapter is a BOLT-ON style (you screw in the screws from the same
side that you mount the adapter.
8/31/92 JBN *8)
– If you need more information, use these Macs resources – |
Web Site: http://www.macspro.com/
Phone: 916-456-6932
|
|
Postal Address:
Macs
7935-A CARLTON ROAD
SACRAMENTO, CA 95826
|
Click here for Units of Measure Conversion Calculators
|