Parts Express Eligible:	Yes
E-mail This Page To A Friend

          This is the Futaba S3004 Light Weight, Ball Bearing Servo.
  This basic servo is used in cars, boats, or where standard servos are used.
   Note: This servo is NOT designed for use with glow powered helicopters.

         This servo can produce high-current draw from your batteries.
         If using NiMH or LiPo batteries, make sure they are capable
                        of delivering sufficient amps.

FEATURES: Single ball bearing on output shaft
          Precise tight fit throughout the geartrain
          Being standard size and lightweight, it fits many applications
          Nylon gears
          One year warranty

INCLUDES: One S3004 standard servo

REQUIRES: Does not include any horns (use FUTM3551 for the horn set)
          If mounting hardware is needed, order Screws (FUTM2250), Eyelets
            (FUTM3650) and Grommets (FUTM2346)

SPECS:    Speed:  0.23 sec/60° @ 4.8V
                  0.19 sec/60° @ 6.0V
          Torque:  44.3 oz-in (3.2 kg-cm) at 4.8V
                   56.8 oz-in (4.1 kg-cm) at 6.0V
          Length: 1.59" (40.4mm)
          Width:  0.78" (19.8mm)
          Height: 1.42" (36mm)
          Weight: 1.30 ounce (38 grams)
          Connector: "J" type with approx. 5" wire

COMMENTS: inch (millimeters)                        ##      .60(15) flange to
          Side view:    1.42(36)            __¦--------¦__           top of
                        bottom to top         ¦        ¦             shaft
                        of case(not           ¦        ¦    1.0(25)  flange to
                        output shaft)         ¦________¦             bottom of
                                              1.59(40.4)             servo

          Top view:               |          ¦O¦        ¦O¦  -
                  case width  0.78(19.8)     ¦ ¦      * ¦ ¦   - holes on-center
                                  |          ¦O¦        ¦O¦  -  0.39(10)
                                                1.93(49)
                                            center-to-center of holes
                                                                    sml11/29/00
                                                                          ir/jl
                                                              updt jxs 10/29/04



– If you need more information, use these Futaba resources –

E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators