Phoenix Model Outrageous 50-60cc Gas/EP ARF 80"

Tower Stock# PMMA1800  •  Manufacturer Stock# PH165
  • front/side (see larger view)
  • rear/side (see larger view)
  • packaging (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Gasoline or Electric Powered, Almost Ready to Fly
.56-.60 Outrageous Pylon Racer from Phoenix Model.
For Intermediate Flyers.


Aileron Control: Dual servo
Covering: High-quality self-adhesive
Cowl: Fiberglass, painted to match trim scheme of covering
Landing Gear: Main, two-piece prebent aluminum with --" (--mm)
diameter wheels and wheel pants
tail, prebent wire with --" (--mm) diameter wheel
Motor Mount:
Engine Mount: Plywood with metal standoffs
Spinner: 3.4" (86mm) diameter plastic, red in color
Fuel Tank: --oz (--cc)
Canopy: Clear, with painted pilot figure
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the


Prebuilt Wing, Fuselage and Tail assemblies, Motor Mount, Engine
Mount, Spinner, Fuel Tank, Wheels, Canopy and Instruction Manual


Radio: At least 6-channel
Servos: Six standard high torque
(2-aileron, 2-elevator, 1-rudder, 1-throttle if using gasoline
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Building and field equipment
Propeller: To match selected motor or engine
Building and field equipment
For Electric Power;
Brushless Motor: Hacker Q80 recommended
ESC: 120-160A to match selected motor
LiPo Battery: 12 cells, 5000-6000mAh
LiPo charging bag
For Gasoline Power;
Engine: 50- 60cc gasoline
Ignition Battery: 4.8 - 6V NiMH/NiCd, or 6.6V LiFe


Wingspan: 80" (2032mm)
Length: 66.8" (1698mm)
Flying Weight: 17.1 - 18 lbs (7.8-8.2 kg)
Wing Area: 1197 sq in (77.2 sq dm)
Wing Loading: 30.47 oz/sq in (93 g/sq dm)
Wing Type: NACA airfoils
Center of Gravity (CG): 4.5" (115mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.47" (12mm) 0.55" (14mm)
Elevators, up/down: 0.47" (12mm) 0.55" (14mm)
Rudder, right/left: 0.79" (20mm) 1.2" (30mm)

jxs 01/16/17

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info